Mandalorian Mercs Costume Club

Mandalorian Armor => Equipment & Accessories => Jetpacks/Backpacks => Topic started by: Yua_Lis on Feb 18, 2019, 08:22 AM

Title: The construction of the backpack of the clone-soldier
Post by: Yua_Lis on Feb 18, 2019, 08:22 AM
starting: https://mandalorianmercs.org/forum/index.php?topic=164460.0

I came from the size of the clone trooper figure Hot Toys, in the picture. And created on this basis backpack. Later created drawings of the finished backpack, so others can build your backpack easier.

(https://pp.userapi.com/c850528/v850528219/ae64f/vxwFy8P2P4o.jpg)

The large compartment of my backpack, back, sides.

Work with PVC 5 mm.
Back, two sides, bottom. Separate part of 5 parts + pipe

(https://pp.userapi.com/c845421/v845421106/1ac365/iiiEKexTTF8.jpg)
(https://pp.userapi.com/c845421/v845421106/1ac3d7/QZAiLCLxUHY.jpg)

The pipe is attached to the bottom of the backpack: rope or wire. Not glue. Find your way.

(https://pp.userapi.com/c845421/v845421106/1ac40d/1abEr81vwl0.jpg)
(https://pp.userapi.com/c845421/v845421106/1ac416/8W_zeZgVzYo.jpg)

The second compartment and the front convex part of the backpack

Here you will have 4 parts: a wall between the compartments, a convex front wall and two side rounded parts.

(https://pp.userapi.com/c845421/v845421106/1ac36d/FYxa6Yt3QVY.jpg)

(https://pp.userapi.com/c844216/v844216543/a690c/MJcjw96vbM0.jpg)

Pockets (assembled separately). Not functional.

Pockets of different thickness, the walls on the front side are smoothly curved. You need to calculate the angle relative to the front of the backpack.

(https://pp.userapi.com/c845421/v845421106/1ac376/PI1sTP9rUt0.jpg)

A lot of angles for the lower pockets. Small parts.

(https://pp.userapi.com/c844216/v844216543/a6915/bO6EMrJIYuw.jpg)
(https://pp.userapi.com/c849236/v849236106/11a9bd/xwZ6nHFbTqg.jpg)

All items of the backpack should be sanded with sandpaper, if necessary, fill in the cracks, and then proceed to the Assembly.

(https://pp.userapi.com/c830608/v830608543/146b39/VcM0BdlGlWE.jpg)

before painting:

(https://pp.userapi.com/c845017/v845017767/7bec8/xws-w3Y7yHg.jpg)
..............
after painting:
(https://pp.userapi.com/c831409/v831409928/131443/PmgJKH7TObI.jpg)

Fastening straps inside the backpack, build up inside layer for strength.

(https://pp.userapi.com/c845421/v845421106/1ac3e0/8WhbIiQdvWk.jpg)
(https://pp.userapi.com/c849236/v849236106/11a9c6/cPPWE_IzDSA.jpg)
(https://pp.userapi.com/c845421/v845421106/1ac404/QfbhmY5gX70.jpg)

Medical device logo, pollution, top cloth cover

(https://pp.userapi.com/c845421/v845421106/1ac3f2/nqFDePZovlA.jpg)
(https://pp.userapi.com/c845421/v845421106/1ac3fb/W5rcbGdrSAU.jpg)
(https://pp.userapi.com/c851520/v851520794/b5165/PG2bYyRwq0E.jpg)

(https://pp.userapi.com/c849328/v849328901/caec3/3Wf1UvZWY1c.jpg)

 :porg2: Continuation of in this topic: https://mandalorianmercs.org/forum/index.php?topic=164460.0
 :porg1: My article in Russian: https://vk.com/@mandalorianfox-clone-backpack

Good luck!
Title: Re: The construction of the backpack of the clone-soldier
Post by: Cattfish on Feb 18, 2019, 10:58 AM
This is great work. The finished product looks amazing.

Thanks for the detailed information, I plan to build one of these backpacks and this will make it so much easier! :like:
Title: Re: The construction of the backpack of the clone-soldier
Post by: Havelock on Feb 18, 2019, 12:37 PM
Beautiful work.
Title: Re: The construction of the backpack of the clone-soldier
Post by: Ruus Baar'ur on Feb 20, 2019, 12:16 AM
I LOVE YOU SO MUCH I'VE BEEN NEEDING EXACTLY THIS THANK YOU