Don't like ads? Help support the Mercs by becoming an Auxiliary Member today!
Official Members also get to use the forum ad-free - so kit up and join us!


Author Topic: Sabine - Rebels Season 3 Action Gear CRL  (Read 357 times)

Ref Al'drann

  • *
  • *
  • *
  • *
  • Rohlan Dyre
  • Awards Award for 25 official invasions. Recruitment - Clan with the largest number of new OM's in 12 months Hard Contact - Clan with the most recorded invasions Award for 10 official invasions.
    • Awards
Sabine - Rebels Season 3 Action Gear CRL
« on: Dec 06, 2016, 12:04 AM »
SABINE ACTION GEAR S3

Helmet
•   Dome, brow band and keyslots must be painted a redish-orange and purple with grey in the design as shown to match visual references.
•   Rear brow band must be painted orange.
•   Upper cheeks must be painted medium-dark grey.
•   Mandibles must be painted dark red/burgundy to match references.
•   The rear panels and lower cheeks must be painted khaki-grey.
•   The right ear must be painted light grey with an orange oval earcap to match references.
•   The left ear must be painted orange to match with a raised cylinder painted light grey.
•   The dome of the helmet must feature a stylized design in accordance with visual references.
•   Must feature a metallic range finder stalk with an accurate rangefinder topper with a grey lens greeblie on top of the rangefinder.
•   The top portion of the rangefinder must be painted dark red/burgundy and the bottom portion must be painted black.
•   Must be weathered to match visual references.

Flight Suit
•   Must be a cotton or cotton blend stretch material two-piece garment with the top being black/ dark charcoal grey with a medium grey pattern and the pants being light greyish brown with a greyish khaki pattern (see reference for color examples)
•   The top must be longsleeved and the pants must be able to tuck into the boots.
•   Top must have a raised collar with a shallow "V split" in the front

Chest Armor
•   Consists of segmented collar armor, right and left chest plates, and center diamond.
•   Must appear to be at least 3mm thick.
•   Chest plates, collar plates, and center diamond must be painted purple and fuchsia/maroon with additional colors to match designs and visual references.
•   Wearer's left chest plate must feature an orange stylized design to match references
•   Wearer's right chest plate must must feature two white diagonal stripes on either side of a red diagonal stripe painted to match references.
•   Center diamond must be yellow/orangish gold to match references
•   Segmented collar must be painted to match visual references and have accurate designs.
•   All plates must be painted and weathered to match references both in color and weathering pattern.
•   All armor must attach securely to the top with proper spacing and be appropriately sized to the wearer.

Shoulder Armor
•   Must appear to be at least 3mm thick. Must have six points and must curve around the upper arm and shoulder.
•   Right shoulder must be light grey with a faded checker pattern and feature the aurebesh "5" design with colors to match references.
•   Left shoulder must be yellow with convor/convoree design painted to match references.
•   Must be painted and weathered to match references both in color and weathering pattern.

Elbow Armor
•   Must appear to be at least 3mm thick.
•   Must be painted orange with burgundy and silver weathering to match visual references.
•   Must be two plates that connect when the arm is straightened and separate when the arm is bent.
•   Must be painted and weathered to match references

Knee armor
•   Must appear to be at least 3mm thick.
•   Must be reddish-orange with yellow and silver paint damage to match visual references.
•   Right knee armor plate must feature two parallel vertical yellow stripes.
•   Must be painted and weathered to match references

Shin Armor
•   Must appear to be at least 3mm thick.
•   Must be painted purple with reddish-orange paint damage to match visual references.
•   Must have a cutout for the knee armor.
•   Must be painted and weathered to match references

Boot Armor
•   Must appear to be at least 3mm thick.
•   Must appear to connect to the shin armor.
•   The left boot armor plate must be painted purple with reddish-orange paint damage to match visual references

Boots
•   Must be made of black or dark charcoal leather or leather like material
•   Must have a black or dark charcoal high heel wedge sole
•   Must be high enough to stop just below the knee.
•   Must be weathered and paint splattered to match references. Pay close attention to the level of weathering on the wearer's right boot, as it features heavier paint splatter than the left.

Leg Flares
•   Must feature 18 silver/grey flares stored in brown leather/leather-like loops that wrap around each calf.
•   Must be worn about 2-3 inches below the knee cutout on the shin armor.
•   Flares and leather loops must be made to match references in color, scale, and construction.

Holster Belt
•   Must be a medium brown leather or leather like material that secures via metal rectangular buckle in front.
•   Must feature 2 drop holsters with an angular design
•   The front holster straps must feature two rivets in a vertical line near the holster.
•   Must have two metallic loops on either side of the belt buckle with the holster connecting between the buckle and the loop.
•   Must feature two horizontal metallic loops where the holster connects to the belt in the back.

Ammo Belt
•   Belt features a silver rectangular buckle
•    Must feature a left and a right rectangular hip pouches made in the same material as the belt.
•   Must feature a droid caller-style communication device affixed vertically on the left side between the buckle and the pouch.
•    Must feature 3 rectangular ammo pouches on the back of the belt.

Gloves
•   Must be black or dark charcoal leather or leather-like material and a fingerless style.
•   Must overlap the flightsuit sleeve so that there is no skin between the garments, but must not extend past the wrist
•   Must be weathered and paint splattered to match references.

Hand Armor
•   Armor pieces must have 6 points and must be constructed to match references.
•   Any attachment method must be hidden.
•   Must be purple with reddish-orange and silver weathering to match references.
•   Right hand armor piece must have a slanted orange stripe and left armor piece must have orange paint detailing painted to match references.
•   Must be weathered and paint splattered to match references.

Gauntlets
•  Must be painted purple and styled to match visual references. Must feature additional paint color chipping to match references.
•  Must be illuminated or have the appearance of being illuminated by painting or using a similar means to accurately portray the gauntlet electronics.
•  Right gauntlet must feature a raised grey interface platform with a small green illuminated screen built in and two red buttons mounted on a black rectangle below the screen.
•  Left must feature a raised grey interface platform with a large green illuminated screen built in with a smaller green illuminated screen mounted closer to the wrist opening of the gauntlet.
•  These gauntlets must be worn as a matched pair.

Optional Alternate Gauntlets
•  Must be painted dark grey and weathered to match references.
•  Must be illuminated or have the appearance of being illuminated by painting or using a similar means to accurately portray the gauntlet electronics.
•  Right gauntlet must feature a raised weapon platform that houses one "Fett style" rocket and two flamethrowers. One flamethrower must be mounted on either side of the rocket.
•  Left must feature a raised weapon/interface platform with a small green illuminated screen built in and an illuminated red button mounted above the screen. Must also feature 3 silver darts mounted to the front-facing vertical side of the raised platform.
•  These gauntlets must be worn as a matched pair.


Westar-35 pistols
•   Animated Clone Wars style pistols.
•   Must be a mismatched pair with one being painted blue, black, and grey, and the other painted grey, black, and orange.
•   Must be painted and weathered to match references in color and weathering pattern.

Wig
•   Must be longer on the right side and cut shorter on the left  and styled to match references. Hair must be light purple with dark purple tips.

Jump Pack/ Jetpack (Optional)
•  Jetpack must be constructed to match visual materials. Must feature a black central tube flanked by two white “wings.”

Darksaber (optional)
•  Pre Vizsla dark saber must match visual references in color, scale, and construction.

Paint Sprayer (Optional)
•   Must be constructed to match visual references.
•   Must feature a red rocker switch on the front of the device.
•   Must feature a silver paint canister in the back.
•   Must feature 5 round, silver push buttons on the left side.
•   Must be painted, weathered, and paint splattered to match visual references.

 


Don't like ads? Help support the Mercs by becoming an Auxiliary Member today!
Official Members also get to use the forum ad-free - so kit up and join us!



Powered by EzPortal