Don't like ads? Help support the Mercs by becoming a Supporter or Auxiliary Member today!
Official Members also get to use the forum ad-free - so kit up and join us!

 Imperial Super Commando - Rebels S3 CRL

  • 0 Replies
  • 1789 Views

Ref Al'drann


    *
  • *
  • 4822
  • Rohlan Dyre
  • Awards 15+ clan level invasions Clan with the most recorded invasions in 2016/2017 Award for 25 official invasions. Recruitment - Clan with the largest number of new OM's in 12 months Hard Contact - Clan with the most recorded invasions
Imperial Super Commando - Rebels S3 CRL
« on: Dec 06, 2016, 12:13 AM »

Helmet
•   Animated Rebels Imperial Mandalorian Super Commando Style helmet constructed to match visual references is required.
•   Helmet dome, faceplate, rear dome, and ear pieces must be painted white. Cheeks, rear helmet inset, rear panel detail squares, the area under the earcaps, andthe  teeth must be light grey. Helmet mandibles and rear raised panel must be painted white. All line details and visor must be black.
•   Helmet must have an earcap on either side. Left earcap must feature a raised oval with a smaller raised circle detail mounted on the top half of the flush left earcap with a single tapered antenna.
•   Right earcap must feature a raised angular block detail extending ⅘ of the way down the flush right earcap with a tapered dual antenna.
•   Helmet must feature an inverted red triangle decal in the center of the facing dome.
•   Helmet must feature embossed line details that match visual references that outline the upper portion of the visor extending all the way around the helmet, around the inverted triangle, and vertically below each earcap.
•   Back half of the helmet must have a quarter-round rib detail running the length of the lower lip of the helmet from the rear of each earcap.
•   Helmet must feature a raised rectangular section on the helmet’s inset back panel. This section  must contain three embossed detailing to match references.
•   Helmet must features a visor dark enough to obscure the wearer’s face. Visor material must be visible in the vertical visor slit of the helmet.
•   The bottom mouth portion of the helmet must have eight “teeth,” with four on each side of the vertical visor portion that curve inward.
•   Rear of the helmet must have two white, two-part decals flanking the raised rear panel detail.
•   Helmet must be painted and weathered to match visual references.

Flight Suit
•   Top portion must be long sleeved with vertical ribs.
•   Garment must be white in color.
•   Sleeves must have red imperial cog decal with a white background on the upper bicep.
•   Pant legs must be a white material, and must be constructed of six panels as seen in reference photos of Gar Saxon/Rebels Imperial Super Commandos, tucked into shin armor.
•   Garment must be weathered to match visual references.
•   Garment must fit tightly to the wearer.

Neck seal
•   Must match the flight suit sleeves in material and be Dark Espresso in color.
•   Must appear to be one seamless piece connected to the sleeves.
•   Must come up the wearer’s jaw-line in a turtleneck fashion.

Boots
•   Boots must not have any zippers, laces, straps or other apparent securing method.
•   Boots must be white with a white sole.
•   Boots must be weathered to match visual references.

Chest Armor
•   Consists of Imperial-style three piece construction that wraps completely around the wearer.
•   Must appear to be at least 3mm thick.
•   The chest armor must have one large chest piece, which matches visual references, with one semicircle indent detail in the center along the bottom edge.
•   The upper ab section must sit under the main chest piece, and features two semi-circle indents along the bottom edge of the plate.
•   The lower ab section must sit under the middle ab section, and features two detail pieces with rectangle details that align under the semicircle portions on the middle ab constructed to match visual references.
•   All chest armor plates must feature embossed line detailing matching visual references.
•   Chest armor and ab plates must be painted white.
•   All plates must be painted and weathered to match references both in color and weathering pattern.

Back Armor
•   Must appear to be seamless with the front chest and ab plates.
•   Must feature a raised white rectangular “strap” at the shoulder that is the same material as the torso armor.
•   Must appear to be at least 3mm thick with rounded edges.
•   Must be painted and weathered to match references both in color and weathering pattern.

Shoulder Armor
•   Shoulder armor must be an upside down arc shape
•   Must appear to be at least 3mm thick with rounded edges. Must curve around the upper arm.
•   Must be painted white.
•   Must attach securely to the chest piece.
•   Must be painted and weathered to match references both in color and weathering pattern.
•   Must include two square plates on the tops of the shoulders, that extend from the front collar area to the rear collar area, as seen in visual references.
•   Square plates must appear to be at least 3mm thick, and must be painted white.
•   Attachment method must be hidden.

Gauntlets
•   Gauntlets must be made of plastic or other rigid material.
•   Must appear to be at least 3mm thick with rounded edges and must seamlessly wrap around the entire arm with a protrusion extending past the elbow.
•   Gauntlets must be painted Dark Espresso, with a white elbow stripe detail as seen in visual references.
•   Both gauntlets must include an orange and a red button, with the orange being on top and red on bottom, as seen in visual references.
•   Must be painted and weathered to match references both in color and weathering pattern.

Hand Plates
•   Hand armor must appear to be at least 3mm thick and must be constructed to match visual references.
•   Gauntlets must overlap or be otherwise attached to the hand plates.
•   Must be painted Dark Espresso with an inverted white triangle outline.
•   Must be painted and weathered to match references both in color and in weathering pattern.

Belt
•   Must be made of plastic or other rigid material, and resemble Imperial-style belts.
•   Must be about six inches wide.
•   Must be white, and is made up of sixteen connected rectangle panels, with the center buckle panels containing an indention, as seen in visual references.
•   Must include two white flanking hip pouches, mounted on both sides of the belt, which are of a trapezoidal shape with a flap closure. Attachment method must be hidden.
•   Garment must be weathered to match visual references.

Cod Armor
•   Must appear to be at least 3mm thick with rounded edges and constructed to match visual references.
•   Must feature embossed line detailing to match visual references.
•   Must be worn under the belt.
•   Must be painted white.
•   Must be weathered to match visual references.

Thigh Armor
•   Must appear to be at least 3mm thick with rounded edges and constructed to match visual references.
•   Must feature embossed line detailing to match visual references.
•   Must be painted white.
•   Must be weathered to match visual references.

Knee Armor
•   Must appear to be at least 3mm thick with rounded edges and constructed to match visual references.
•   Must attach securely to the shin armor via a hidden attachment point.
•   Must feature embossed line detailing to match visual references.
•   Must be Dark Espresso with white detailing matching visual references.
•   Must be weathered to match visual references.

Shin Armor
•   Must appear to be at least 3mm thick with rounded edges and constructed to match visual references.
•   Shin armor must extend down the side of each foot.
•   Must be Dark Espresso.
•   Must be weathered to match visual references.

Gloves
•   Must match the flight suit sleeve material.
•   Must be white in color.
•   Garment must be weathered to match visual references.

Jetpack
•  The jetpack must include 5 main components: two flanking wing components, one recessed rectangular plate, one tubular thruster detail, and one small square detail plate.
•   All components must match the visual references.
•   Must feature embossed line detailing to match visual references.
•   The wing components must be painted white.
•   The recessed rectangular base must be light grey.
•   The tubular thruster must be painted medium grey and dark grey.
•   The small square detail plate must be painted orange, with light grey details.
•   Components must be weathered to match visual references.

Weapon
•   Scoped Rifle must be constructed to match visual references in appearance and scale.
•   Stock must have the appearance of being telescopic/collapsible.
•   Receiver must have two sets of iron sights, one set in the rear and one set in the front. The rear set is made up of two posts. The forward set is made up of two posts forward and one circular cap set behind the two forward posts.
•   The scope must be mounted in the center of the receiver on a single inverted trapezoid mount, and must have an ocular lens and an objective lens larger than the main tube.
•   The receiver must be square in design, with a single barrel protruding from the weapon, with an inset barrel housing block.
•   The receiver must have an inset rounded square detail on the right and left side towards the front of the weapon.
•   The receiver must have an inset rectangular detail on both sides of the main body of the receiver.
•   The receiver must have an inset circle and rectangle detail on both sides of the rear of the receiver, near the stock.
•   The stock must have an inset circle detail on both sides, and an obvious butt pad.
•   The pistol grip must be of a blocky design, and must feature line details as seen in visual references.
•   The rifle must contain an elongated, rectangular trigger guard.
•   The main receiver must be painted a darker grey.
•   The secondary details on the receiver, barrel block, and scope must be painted a light grey.
•   The sight posts, trigger guard, grip, barrel, and stock must be painted black.
•   Must be painted and weathered to match references both in color and weathering pattern.

Author: Drake

 


Don't like ads? Help support the Mercs by becoming a Supporter or Auxiliary Member today!
Official Members also get to use the forum ad-free - so kit up and join us!




Powered by EzPortal