Don't like ads? Help support the Mercs by becoming a Supporter or Auxiliary Member today!
Official Members also get to use the forum ad-free - so kit up and join us!

 Death Watch Nite Owl (TCW S4-5) CRL

  • 0 Replies
  • 594 Views

Dha Bral


    *
  • *
  • *
  • *
  • 2626
  • Vindicated.
  • Awards Celebration Chicago Legends of Mandalore Brigade Recruitment - Clan with the largest number of new OM's in 12 months 2016 EnviroOps
Death Watch Nite Owl (TCW S4-5) CRL
« on: Jul 24, 2018, 04:43 AM »
Death Watch Nite Owl


 
Helmet
•   A Deathwatch style “Nite Owl” helmet must be used.
•   The main color of the helmet is medium to dark grey with the cheeks and mandibles and painted white ans light grey to match visual references.
•   A distressed ligjt grey or white “V” logo is located at the center of the forehead.
•   The rangefinder is colored a medium to dark grey with ear-cap and stalk the located on the right side of the helmet.
•   Paints should have a dull satin or matte finish appearance to match visual references as closely as possible.

Shoulder Armor
•   Must appear to be at least 3mm thick and be of the Death Watch Nite Owl style.
•   Must have four points and must curve around the upper arm.
•   Both shoulders include a “Nite Owl” logo in the center of each piece.
•   Must be painted medium to dark grey and weathered to match references
•   Paints should have a dull satin or matte finish appearance to match visual references as closely as possible.

Chest Armor
•   Consists of collar armor, right and left chest plates, abdominal plate, and center diamond.
•   Must appear to be at least 3mm thick in the Death Watch Nite Owl style.
•   The Collar, Abdominal and Chest plates must be painted medium to dark  grey and weathered to match reference photos.
•   Center diamond has a raised vertical rectangle and should match visual references.
•   Paints should have a dull satin or matte finish appearance to match visual references as closely as possible.

Back Armor
•   Must appear to be at least 3mm thick in the animated Death Watch style.
•   Must be painted medium to dark grey and weathered to match reference photos.
•   Paints should have a dull satin or matte finish appearance to match visual references as closely as possible.

Cod Armor
•   Must appear to be at least 3mm thick in the Death Watch Nite Owl style.
•   The Cod armor is medium to dark grey and made of three segmented pieces
•   Codpiece is worn below all of the belts, and should be sized to the wearer.
•   Paints should have a dull satin or matte finish appearance to match visual references as closely as possible.

Thigh Armor
•   Must appear to be at least 3mm thick in the Death Watch Night Owl style.
•   Must be painted medium to dark grey and weathered to match reference photos.
•   The plates have built in holsters for a Westar 35 blaster.
•   The plates have no visible attachment method.
•   A grey strap is located at the mid-upper portion of the armor that securely fastens around the upper thigh.
•   Paints should have a dull satin or matte finish appearance to match visual references as closely as possible.

Knee Armor
•   Must appear to be at least 3mm thick in the Death Watch Nite Owl style.
•   Must be painted goldish brown and weathered to match reference photos.
•   The plates have no visible strapping or attachment method.
•   Paints should have a dull satin or matte finish appearance to match visual references as closely as possible.

Shin Armor
•   Must appear to be at least 3mm thick in the Death Watch Night Owl style.
•   Must be painted light grey and weathered to match reference photos.
•   The plates have no visible strapping or attachment method.
•   Paints should have a dull satin or matte finish appearance to match visual references as closely as possible.

Boots
•   Ankle high, black or dark grey with a rubber sole.
•  Boot armor must appear to be at least 3mm thick in the animated Death Watch Nite Owl style.
•   Consists of Ankle spats, Toe caps and Heel covers with raised rectangular horizontal sections.
•   Must be painted light grey and weathered to match reference photos.
•   Heel cover is painted black with a rectangular horizontal light grey section in the middle of the rear.
•   Toe cap and heal cover are attached with no visible means of attachment.
•   Paints should have a dull satin or matte finish appearance to match visual references as closely as possible.

Gloves
•   The gloves are made of sturdy materials such as leather, leather-like material, or tight fitting canvas and are dark blue in color. Should match the flightsuit color as closely as possible. No rubber gloves are permitted.
•   Gloves are tucked underneath the gauntlets to match references.

Left Gauntlet
•   Must appear to be at least 3mm thick in the Death Watch style.
•   Must be painted white or light grey and weathered to match reference photos.
•   The gauntlet has a raised front section with the closure worn on the inside.
Left gauntlet contains the following components:
•   Gauntlet buttons should match visual references as closely as possible.
•   Features four forward facing darts in front of middle section.
•   Contains a silver grappling hook to match references in style and placement.
•   Contains a slot for the hidden knife to extend or retract. Placement must match visual references.
•   Paints should have a dull satin or matte finish appearance to match visual references as closely as possible.

Right Gauntlet
•   Must appear to be at least 3mm thick in the animated Death Watch style.
•   The gauntlet has a raised front section with the closure worn on the inside.
Right gauntlet contains the following components:
•   Gauntlet buttons should match visual references as closely as possible.
•   A slit for blade disc to be expelled over wrist opening to match visual references.
•   Red colored, trapezoid-shaped range finder target.
•   Two forward facing grey or silver blasters, in front of middle section.
•   Paints should have a dull satin or matte finish appearance to match visual references as closely as possible.


Flight Suit
•   Made of a cotton or cotton spandex lycra blend material, one or two-piece garment and must be fitted snug to the wearers body.
•   The flightsuit must be dark blue in color and fit appropriately to match visual references.

Neck seal
•  The Neck Seal should match references and can be a turtleneck style attached to the flightsuit or attached to the vest. Should be made out of  similar material as the flightsuit.
•   Must be dark grey weathered to match reference photos.
•   If a neck seal closure is present, an attempt to conceal it should be made.

Flak Vest
•   The flak vest is dark grey, made out of  similar material as the flight suit and should match references as closely possible.
•   The short sleeves extend slightly past the shoulder armor
•   The vest must be long enough to extend under the girth belt.
•   The short sleeves should be trimmed around the bottom in grey to match visual references.

Ammo Belt
•   The ammo belt is dark brown and made of a leather or leather-like material and match references in width. Width should be appropriately scaled to the height of the wearer.
•   The ammo belt has no apparent closure method. Recommended closure method would be hidden Velcro in the back.
•   Attached to the belt are eight equally sized Ammo Boxes.

Girth Belt
•   The girth belt is dark brown and made of a thick leather, or leather-like material and match references in width. Width should be appropriately scaled to the height of the wearer.
•   Belt featurings horizontal lines to match visual references.
•   The girth belt closure should attach in the back and match visual references with the closure method hidden if possible

Jetpack
•   Animated Nite Owl style jetpack.
•   Must be painted medium to dark grey & white or light grey and weathered to match reference photos.
•   Jetpack must fit snugly against and centered on the back plate.
•   Paints should have a dull satin or matte finish appearance to match visual references as closely as possible.


Weapon
•   Dual Westar-35 blaster pistols.
•   Must be painted medium to dark grey and weathered to match reference photos.
•   Paints should have a dull satin or matte finish appearance to match visual references as closely as possible.

Author: Syper

« Last Edit: Jul 24, 2018, 04:50 AM by Dha Bral » Logged
It's spelled "Canon", not "Cannon".
 


Don't like ads? Help support the Mercs by becoming a Supporter or Auxiliary Member today!
Official Members also get to use the forum ad-free - so kit up and join us!




Powered by EzPortal