Don't like ads? Help support the Mercs by becoming a Supporter or Auxiliary Member today!
Official Members also get to use the forum ad-free - so kit up and join us!

 Clan Wren Male B CRL

  • 0 Replies
  • 442 Views

Dha Bral


    *
  • *
  • *
  • *
  • 2626
  • Vindicated.
  • Awards Celebration Chicago Legends of Mandalore Brigade Recruitment - Clan with the largest number of new OM's in 12 months 2016 EnviroOps
Clan Wren Male B CRL
« on: Oct 06, 2018, 09:26 PM »
CLAN WREN MALE B






Helmet
•   Animated Rebels Protector helmet or modified Jango helmet must be used.
•   Helmet must be painted medium gray as base color.
•   Helmet Dome must feature stylized Wren crest, wings in dark gray, with “eyes” in light blue, and the crest outlined in black to match reference.
•   Earcaps must be painted in light gray, to match base color.
•   Range Finder must be painted in medium gray to match base color.
•   Keyslots must be painted in pale brown.
•   The paint chipping and weathering on the helmet must be painted to match visual references as closely as possible both in color and in weathering pattern.

Flight Suit

•   Must be a cotton or cotton blend stretch material one-piece garment or have the appearance of a one-piece garment.
•   Must be dark gray material, with medium gray patterns starting from the hips to the thighs to match reference as closely as possible.
•   Sleeves must be full-length.
•   Weathering must match visual reference as closely as possible.
•    Top must have a high collar in dark gray.

Neck seal
•   Must be a cotton or cotton blend stretch material.
•   Must be dark gray or match flightsuit base color.
•   Must cover the full neck, such as a balaclava, with no visible skin.

Flak Vest
•   No vest is required. Armor is attached directly onto the flightsuit.
•   If vest is used, must match the flightsuit in fabric and color.

Boots

•   Must be made of leather or leather-like material.
•   Must be medium gray with a black line on the toecap.
•   Must have a medium gray flat sole.
•   Weathering must match visual reference as closely as possible.

Chest Armor
•   Consists of collar armor, chest plates, ab plate, and diamond as shown in reference. Plates must be styled and angled to match visual references.
•   Must appear to be at least 3mm thick with hard edges.
•   Collar (front and back) must be single piece or appear to be, covering up to the top of the shoulder blades.
•   Plates must be colored in medium gray.
•   All plates must be painted and weathered to match references both in color and weathering pattern.
•   All armor must attach securely to the vest with proper spacing.

Leg Armor
•   Consists of thigh, knee & full shin armor.
•   Thigh armor must be a solid piece or semi-rigid. Must be placed starting from the hip going down the sides. Must be painted in medium gray and match weathering and paint in references.
•   Shin armor must be a full-coverage, solid piece of armor in medium gray with details matching visual references.

Back Armor
•   Backplate must be shaped and sized to match visual references.
•   Must appear to be at least 3mm thick with hard edges.
•   Backplate must be colored in medium gray.
•   Must be painted and weathered to match references both in color and weathering pattern.
•   Backplate center should be flat in order to attach the jetpack.

Shoulder Armor
•   Must appear to be at least 3mm thick with hard edges. Must have six points with angles matching visual reference.
•   Must be colored in medium gray and outlined with dark gray stripe to match references.
•   Must be painted and weathered to match references both in color and weathering pattern.

Bicep Armor

•   Must have the appearance of a one-piece wrap-around plate and  painted in medium gray.
•   Weathering must match reference.

Cod Armor (if applicable)

•   No cod armor required.

Knee Armor
•   Must appear to be at least 3mm thick with hard edges. Must have six points and match visual reference details.
•   Must be colored in medium gray with a “T” shape going from the upper & mid points, down to the bottom middle points. Remaining gaps on the sides must be painted to match visual references.
•   Must be attached directly to the flightsuit, or with concealed strapping.
•   Must be painted and weathered to match references both in color and weathering pattern.

Left Gauntlet
•   Must be painted in medium gray.
•   Gauntlets can be hinged on the inside of the forearm and close using a secure, approved method. Gauntlet may be a single solid piece.
•   Must be painted and weathered to match references both in color and weathering pattern.
•   Must feature two rectangle buttons on top, one light blue and one red. On the side accessory, must feature two small vertical buttons in light blue, and a wider horizontal red button to match visual references.
•   Must feature three darts placed in the cover facing forward.

Right Gauntlet

•   Must be painted in medium gray.
•   Gauntlets can be hinged on the inside of the forearm and close using a secure, approved method. Gauntlet may be a single solid piece.
•   Must be painted and weathered to match references both in color and weathering pattern.
•   Must feature three rectangle buttons on the top cover to match visual references. The right button colored red, and the remaining two in light blue. Must feature a large trapezoid button under these buttons colored in light blue. Must feature a large rectangular button colored in red on the blade cover, with the tip of the hidden blade showing.
•  A flamethrower on the outside of the gauntlet must be present and should match visual references in size and shape.

Jetpack

•   Jetpack must be animated “Arena” style or animated JT-12 Jetpack with round exhaust thrusters to match references.
•   Jetpack must be painted medium gray as base color. Jetpack tops must feature a black line on both side tops and rocket top to match visual references.
•   Must be painted and weathered to match references both in color and weathering pattern.
•   Jetpack must fit snugly against the backplate and be supported by concealed strapping, magnets or approvable attachment methods.

Ammo Belt
•   Belt must be leather or faux leather.
•   Belt must be dark gray .
•   Belt must have 3 pouches in total, two on the wearer's left side and one on the right.
•   Belt must be closed with a gray / brushed metal buckle at the front with a darker gray detail on the center.
•   Belt must feature two canisters on the wearer's right side.
•   Pouches must have a trapezoid shaped cover and angled to match visual references.
•   Belt must have holster slings attached by a clip on the  wearer's right side.
•   Holster must be made of leather/faux leather, colored in the same tone as the belt.
•   Holster must have thigh straps to secure their correct placement.

Gloves

•   Glove must be leather/faux leather or match flightsuit material.
•   Glove must be pale brown.
•   Glove must have stitching along the mid-section of each finger.
•   Gloves must have handplates armor attached. Must appear to be at least 3mm thick with hard edges. Must have six points, with the top edges having a smaller gap and angle as reference. Must be painted in medium gray with a dark gray outline.

Girth Belt

•   Belt must be leather/faux leather.
•   Belt must be pale brown to match reference.

Weapon

•   Must be a pair of animated Westar-35 pistols constructed of approved materials.
•   Must be painted and weathered to match references in color and weathering pattern.

Author: Ty'renn Argos

Logged
It's spelled "Canon", not "Cannon".
 


Don't like ads? Help support the Mercs by becoming a Supporter or Auxiliary Member today!
Official Members also get to use the forum ad-free - so kit up and join us!




Powered by EzPortal