- Hi.
I am from Russia. I recruit in Red Fist Clan (Russian MMCС)
I apologize in advance for bad English. I write with Google translator.
The beginning of the build here:
http://mandalorianmercs.org/forum/index.php?topic=126405.0, but I was advised to create a theme from you.
I'm not going to copy everything, just what I'm working on.
The armor has been in process since 2017. PVC material 5 mm
Ready helmet, and all, that see on me now.
Plastic vizor and tinting coating 10%
Medical backpack (clone backpack). Share the process. All made by hand, PVC sheet 5 mm, with toy clone soldier.
There were no exact drawings.
Step one: Everything was done first from a thick paper layout. Then it was cut on a PVC sheet.
Step two: make side pockets
Small details glue together with glue, cover with a mix a surface where cracks. Dries one day, the surface is sanded with sandpaper.
Step three: the Back and front of the MEDPACK (clone backpack).
The back part is easy to assemble. Clear lines, minimum cost and effort. The front panel of the backpack takes a lot of time. Because it has a special shape. Bend the sheet, from the inside fasten the corners on the glue. Hard work.
Step four: build clone backpack
All elements of the backpack before Assembly.
Step five: painting
Spray paint high pigmentation “Arton”, N-110 cream.
Step six: Applying the medic's emblem.
Used acrylic paint, applied with an artistic brush by hand.
Step seven (not the last): make a fabric cover and straps.
My straps are orange, the color of the armor sewn on top of the black straps.
Step eight: surface contamination
Step nine: fill it with medical instruments. In the process!
The straps are comfortable when wearing clone backpack. The weight of the empty backpack clone a 1.7 kg (3.74 lb)
And now photo with clone backpack.
Photo from the festival Opencon 2018 Kazan
Knife. Will be attached to the belt. Made of PVC 5 mm.
In the process the armor for the back.
I would be grateful for advice and recommendations.