Don't like ads? Help support the Mercs by becoming a Supporter or Auxiliary Member today!
Official Members also get to use the forum ad-free - so kit up and join us!

 Paz Vizla - Heavy Infantry Mandalorian

  • 13 Replies
  • 2824 Views

bernie


    *
  • *
  • *
  • *
  • 729
  • "There's no reason we can't be civil"
  • Awards Award for 50 official invasions. 15+ invasions in 2017 Celebration Orlando 2017 Poster Boy - Official Member appears in costume in the most photos EnviroOps
Paz Vizla - Heavy Infantry Mandalorian
« on: Mar 31, 2020, 05:50 PM »
Helmet
•   Heavy infantry mandalorian style helmet.
•   Must be sized correctly in proportion to wearer’s body.
•   Must have a black tinted visor that completely obscures the wearer’s face.
•   The helmet’s main color is baltic blue, with light blue inner cheeks and faceplate.
•   Must feature a heavily weathered ridge that runs the length of the dome of the helmet.
•   The rear of the dome extends slightly further than the back of the helmet.
•   Must feature 2 triangular slots over the right side of the brow.
•   The helmet has rectangular earcaps on both sides. Both earcaps have vents on the front and rear and are painted silver with gunmetal accents.
•   The left earcap features a U-shaped rangefinder painted gunmetal grey. The rangefinder is connected with a stepped section to the earcap.
•   Back of the helmet features a rectangular box with 5 keyslots and a round vent at the top.
•   Helmet must be painted and weathered to match references both in color and weathering pattern.

Flight Suit
•   Must be a cotton or cotton blend one or two-piece garment colored black and must fit snuggly to the wearer.
•   Must feature double sleeves, where the longer sleeve is ribbed and colored light grey.
•   Must feature light grey, ribbed breeches which cover the pants and and upper leg part of the black flightsuit.
•   The flightsuit has no visible pockets.
•   The flightsuit has visible, white stitching.
•   The flightsuit has light, brown stained weathering across its entirety.

Neck seal
•   Must be made of the same material and color as the flightsuit.
•   The neckseal has visible, white stitching.
•   The neckseal has light weathering.
•   Neckseal must match visual references.

Boots
•   Chelsea style boots.
•   Most accurate shoes are Sketchers brand "Blaine Orsen" boots
•   Dark brown roughout leather or leather like material
•   must feature a baltic blue armored plate on the toe.
•   Armored plate must feature three center ribs and raised edge.
•   Boots must match visual references.

Chest Armor
•   One piece chestplate painted baltic blue with a silver and gunmetal grey diamond.
•   Must be appropriately sized to the body of the wearer.
•   The diamond sits flush with the chest plate and has a groove running along its length. •   The inner part of the diamond must feature a raised, rectangular part, of which the bottom half is grooved.
•   On the left of the diamond are two trapezoid, gunmetal grey details.
•   Top right of the chest plate must feature a gunmetal grey vent. This vent sits just below the shoulder straps.
•   Must feature a separate ab plate composed of two pieces. The top piece is a smooth piece with a raised section running the top length and sits just below the chest plate. The bottom piece is a rectangular piece with ribs about 2” wide running along its width.
•   Must feature armored straps on the shoulders.
•   Chest plates must be painted and weathered to match references both in color and weathering pattern.

Back Armor
•   One piece back armor which attaches to the armored shoulder straps.
•   Must be painted baltic blue
•   Must feature a raised middle bar in the centre to which the jetpack attaches.
•   Must be painted and weathered to match references both in color and weathering pattern.

Right Shoulder Armor
•   Bell shaped shoulder plate painted baltic blue.
•   Must have a yellow ochre bicep plate.
•   Yellow bicep plate must feature a raised edge and raised center rib.
•   Must feature a black mythosaur in the center.
•   Must be painted and weathered to match references both in color and weathering pattern.

Left Shoulder Armor
•   Bell shaped shoulder plate painted baltic blue.
•   Must have a baltic blue bicep plate with raised edges.
•   Shoulder plate must feature a raised center rib which stops halfway, flanked by 2 raised ribs on each side.
•   Must be painted and weathered to match references both in color and weathering pattern.

Elbow armor
•   Squarish oval shaped elbow plates painted baltic blue.
•   The elbow plates have no visible attachment method.

Cod Armor
•   Ellipse shaped codpiece painted baltic blue
•   Must feature 2 square plates at the top, just below the belt
•   Top of the codpiece is hidden by the belt
•   Must be painted and weathered to match references both in color and weathering pattern.

Left thigh armor
•   Box shaped thigh armor featuring a raised center and cut-off corners
•   Must feature a raised edge on the central part
•   Must curve around the wearers thigh without any visible attachment methods.
•   Must be painted and weathered to match references both in color and weathering pattern.

Right thigh armor
•   Box shaped thigh armor featuring a raised center and cut-off corners
•   Must feature a square rim on the central part
•   Must curve around the wearers thigh without any visible attachment methods.
•   Must be painted and weathered to match references both in color and weathering pattern.

Left knee Armor
•   Box shaped knee plate with a raised center and cut-off corners.
•   Knee plate is painted yellow ochre.
•   Must feature a wing on each side of the knee plate.
•   The knee plate has no visible attachment method
•   The left plate features a raised edge and a center cutout
•   Must be painted and weathered to match references both in color and weathering pattern.

right knee Armor
•   Trapezoid box shaped knee plate with a raised center.
•   Knee plate is painted yellow ochre.
•   Must feature a wing on each side of the knee plate.
•   The knee plate has no visible attachment method
•   Must be painted and weathered to match references both in color and weathering pattern.

Left shin armor
•   Cylindrical shaped shin armor which covers the entire lower leg area.
•   Must be painted baltic blue
•   Must feature a raised rib on top and a raised front plate.
•   Must feature an armored plate with a raised edge and curved sides covering the top of the boot and bottom of the shin armor. The armored plate must be painted yellow ochre.

Right shin armor
•   Cylindrical shaped shin armor with a narrower bottom section which covers the entire lower leg area.
•   Must be painted yellow ochre with a narrow brown band at the top of the narrow section.
•   Must feature a raised section on top that extends past the main body of the shin.
•   Must feature  a raised rib at the front which stops just above the narrow section.
•   Must feature a flat armored plate with curved sides covering the top of the boot and bottom of the shin armor. The armored plate must be painted yellow ochre.

Left Gauntlet
•   Must be painted yellow ochre
•   Clamshell without any visible closure method.
•   Must feature a calculator pad on the rear right side of the gauntlet.
•   Must feature a raised centre section consisting of three stepped parts. The raised centre has 2 grooves running its length.
•   Must feature a large box on the left side with a cylindrical barrel at the front.
•   Barrel must feature three vents on each side and has heat discoloration.
•   The gauntlet must have a light grey fabric covered hose extending from the box which slides into the short sleeve of the flightsuit.
•   Must be painted and weathered to match references both in color and weathering pattern.

Right Gauntlet
•   Must be painted reddish brown.
•   Clamshell without any visible closure method.
•   Must feature a raised centre section consisting of three stepped parts. The first two parts feature a centre groove.
•   Must feature a silver and red, cylindrical shaped flamethrower on the second part of the raised section, located on the left side.
•   Must be painted and weathered to match references both in color and weathering pattern.

Jetpack
•   Yellow ochre painted jetpack, with dark red, silver and black details.
•   The jetpack consists out of a centre trapezoid part flanked by two additional thrusters.
•   Centre part must feature a yellow and black painted cylinder which connects to the ammo tube of the main weapon.
•   Must feature three silver cones on top with a flat top. The centre cone is about half the size of the other two.
•   Jetpack must fit snugly against the back plate without sagging.
•   Must be painted and weathered to match references both in color and weathering pattern.

Ammo Belt
•   Dark brown belt made from leather or leather-like material.
•   Belt must feature a silver C-shaped buckle
•   Must feature four large, rectangular pouches on each side.
•   Must feature a large tube shaped pouch on the inner side of the innermost right pouch.
•   Must feature two belt loops at the front, both holding a black, square greeblie. The right belt loop must feature a silver detail on front.

Kama
•   Russet brown colored kama made from cotton or cotton blend material.
•   The kama sits under the belt, covering its top part.
•   Must be frayed at the bottom.

Gloves
•   Black leather leather-like gloves.
•   Must feature a trapezoid shaped armored plate painted on each glove. The left armored plate is painted reddish brown, the right is painted light blue.

Weapon
•   Large, three barrelled blaster rifle
•   The blaster is painted gunmetal grey with silver and black detailing.
•   Must feature three DC-17 barrels minus the T-strips.
•   The barrels must feature heat discoloration at the muzzle.
•   Must attach to the central cylinder of the jetpack via a segmented ammo tube.
•   Must be painted and weathered to match references in color and weathering pattern.

« Last Edit: Apr 26, 2020, 07:33 AM by bernie » Logged

Koda_Khrome


    *
  • *
  • 257
  • Awards Award for 10 official invasions. Celebration Chicago Hard Contact - Clan with the most recorded invasions
Re: Paz Vizla - Heavy Infantry Mandalorian
« Reply #1 on: Apr 02, 2020, 10:01 AM »
Are these the official CRL list? If so AMAZING!!!! :porg2:

Logged

Rhragnarok


    *
  • 15
  • This is the way.
Re: Paz Vizla - Heavy Infantry Mandalorian
« Reply #2 on: Apr 12, 2020, 06:07 PM »
Yeah I would also be curious how close to complete these are.    Also, the Baltic Blue and Light Blue colors for the armor, as well as the yellow ochre...are those names coming from a specific brand of paint?  Because multiple brands might have the same color names but they will look different.

Logged
Rhragnarok

Rhragnarok


    *
  • 15
  • This is the way.
Re: Paz Vizla - Heavy Infantry Mandalorian
« Reply #3 on: Apr 12, 2020, 06:47 PM »
Also, I have done alot of research on this and I don't believe the flight suit it black as thsi CRL is stating.  It's more of a dark to medium gray.

This image of the cardboard standup is by far and away the best image we have of the costume and it's clearly not black.  It's a dark gray very similar to the color of the Din costume.


This is a good shot of the Din costume which is much more brightly lit. 


And you can see here how dark that costume can look in the wrong lighting.


« Last Edit: Apr 12, 2020, 07:13 PM by Rhragnarok » Logged
Rhragnarok

Bowfanny


    *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • 8697
  • When in doubt, be kind.
  • Awards Order of the Ori'Ramikad Celebration Chicago 11+ Invasion Report Appearances Award for 25 official invasions. Award for 10 official invasions.
Re: Paz Vizla - Heavy Infantry Mandalorian
« Reply #4 on: Apr 17, 2020, 09:25 PM »
Could be a black flightsuit heavily weathered with dust or similar dirty weathering.

Logged

QMU#084

Rhragnarok


    *
  • 15
  • This is the way.
Re: Paz Vizla - Heavy Infantry Mandalorian
« Reply #5 on: Apr 17, 2020, 09:34 PM »
I think it's a dark gray.  Death Troopers are black.  This is nowhere near black.

Logged
Rhragnarok
Re: Paz Vizla - Heavy Infantry Mandalorian
« Reply #6 on: Apr 19, 2020, 05:24 PM »
I would also say dark grey for the flightsuit. Looking at the standee image the gloves are without a doubt black but the suit is nowhere near that dark. With heavy weathering it would be very difficult to get an even tone across the whole of the costume.

Bowfanny


    *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • 8697
  • When in doubt, be kind.
  • Awards Order of the Ori'Ramikad Celebration Chicago 11+ Invasion Report Appearances Award for 25 official invasions. Award for 10 official invasions.
Re: Paz Vizla - Heavy Infantry Mandalorian
« Reply #7 on: Apr 22, 2020, 05:42 PM »
I would also say dark grey for the flightsuit. Looking at the standee image the gloves are without a doubt black but the suit is nowhere near that dark. With heavy weathering it would be very difficult to get an even tone across the whole of the costume.
I’ve turned dark green camp utilities tan doing sugar cookies at Marine Corps bootcamp Lol consistency is a matter of how long you do it!

Logged

QMU#084

Slade Kel


    *
  • *
  • *
  • *
  • 8070
  • Feet First Into Hell
  • Awards Award for 10 official invasions. Order of the Ori'Ramikad
Re: Paz Vizla - Heavy Infantry Mandalorian
« Reply #8 on: Apr 23, 2020, 08:22 PM »
As a connoisseur of black soft parts (nearly every kit I've done since I joined had them) there's a wide variety of shades of black before you get into gray, and a lot of them depend on weathering. There's also a pretty big difference between black leather and black cloth. I can see the argument from the cardboard cutout about 'dark charcoal grey' but at that point there's a really fine line between it and 'weathered black'. The brown 'dust' stain weathering across the suit would turn black to a lighter black, and charcoal grey to more of a middle grey, in my experience.

Logged
QMU 72| M.A.B.E.L. 77| Cabur Akaata 144
Re: Paz Vizla - Heavy Infantry Mandalorian
« Reply #9 on: May 09, 2020, 01:27 PM »
Right gauntlet colour I don’t think is reddish brown, from looking at 4K still shots it looks more like molotow chocolate brown then weathered

Logged
Re: Paz Vizla - Heavy Infantry Mandalorian
« Reply #10 on: May 10, 2020, 05:02 PM »
Hey all, I'm new here and joined the forums to put in this request. I think the wording on the belt boxes should be changed slightly.

Current - "Must feature four large, rectangular pouches on each side."
Updated - "Must feature 2 large, rectangular pouches on each side, with 4 total across the belt"

Or something to that effect. As it reads now it sounds like you want 8 total pouches, which just isn't the case.

Thanks for your consideration.

Logged

Evaar'la Kal


    *
  • *
  • *
  • 548
  • Pistachio!
  • Awards Award for 10 official invasions.
Re: Paz Vizla - Heavy Infantry Mandalorian
« Reply #11 on: May 21, 2020, 12:02 AM »
In regard to the flightsuit colour, perhaps adding a line to clarify that the black flightsuit should appear to be more of a dark charcoal grey after weathering would help clear up any confusion with those building this costume.  Many people collect their own reference images since the CRLs do not provide any reference images and wording like how the CRL is currently worded can be confusing in situations like this.  Same as for the comment on the belt pouches.

I've seen people commenting on our CRLs from The Mandalorian in various facebook groups and many are not satisfied with the lack of visual references and inconsistencies with reference images, to the point where I've seen several people say they won't even bother applying for MMCC membership.  I know that the CRL writers worked hard to put these together and they did a great job, but it still seems like a few updates are needed.  Just something to consider.

Logged
Instagram: @evaarla_kal

Sh'Sou HolDa


    *
  • *
  • *
  • *
  • 438
  • "I have carbon scoring older than you..."
  • Awards Award for 25 official invasions. Hard Contact - Clan with the most recorded invasions Award for 10 official invasions. Order of the Ori'Ramikad
Re: Paz Vizla - Heavy Infantry Mandalorian
« Reply #12 on: Jun 12, 2020, 02:11 PM »
Just going to leave this here for helpful visual ref.


Logged
Re: Paz Vizla - Heavy Infantry Mandalorian
« Reply #13 on: Jul 11, 2020, 11:32 AM »
Baltic Blue = Tamiya X-13?

A point on gun barrels.

"The barrels must feature heat discoloration at the muzzle."

On the Amban Phase-Pulse rifle mandibles, yes, I agree, it looks cool too.

On the triple barrel blaster, the flash hiders would be sooty, carbon scored, not heat stained. There are some brass copper elements in the body I intend to heat stain, but not the muzzle. Plus I am doing all in black except the air cooled jackets. I will do them in Gun Metal and see what effect I can get out of Tamiya weathering kit when it arrives. its coming together and looking good so far.

Logged
 


Don't like ads? Help support the Mercs by becoming a Supporter or Auxiliary Member today!
Official Members also get to use the forum ad-free - so kit up and join us!




Powered by EzPortal
anything