Don't like ads? Help support the Mercs by becoming a Supporter or Auxiliary Member today!
Official Members also get to use the forum ad-free - so kit up and join us!

 The Mandalorian - version 1

  • 0 Replies
  • 2672 Views

bernie


    *
  • *
  • *
  • *
  • 661
  • Awards Award for 50 official invasions. 15+ invasions in 2017 Celebration Orlando 2017 Poster Boy - Official Member appears in costume in the most photos EnviroOps
The Mandalorian - version 1
« on: Nov 12, 2019, 12:08 PM »


Hi Everyone,

We've been working on The Mandalorian CRL for some time now, and with the release of the show, and several people building this costume, it was high time to get this one out there. Please keep in mind that this is a promotional CRL, and it may contain some inaccuracies, which as the show moves on, and more references are available, will be updated.

EDIT 01/27/2020: the CRL has been updated with new references and should now cover all possible combinations as shown from episode I to III. We will be releasing the V2, or beskar version as some call it, soon.


Helmet
   The helmet is painted chrome.
   The helmet has a raised comb running along the centre of the dome, which is approx. 4cm/1,5 inches wide. This comb ends just above the keyslot box in the rear. The centre part of the comb is flat, with sloping sides.
   The helmet has a double brow above the visor. This brow does not extend past the earcaps.
   Both earcaps are mirrored copies of eachother and consist out of two sections. Both sections are painted chrome, with a dark colored band running across the side of the top part. The center raised part of the earcaps (both top and bottom part) are a lighter shade of chrome.
   The back of the helmet has a rectangular box with 6 louvered keyslots. The louvres are a lighter shade of chrome.
   The paint chipping and weathering on the helmet must be painted to match visual references as closely as possible both in color and in weathering pattern.
   Helmet must match visual references.

Flight Suit
   Must be a cotton or cotton blend one or two-piece garment colored off-gray and must fit snuggly to the wearer. If a two-piece suit is used it must appear as if one-piece.
   Must have long sleeves with short sleeves on top of them, both made from the same material. Each short sleeve has a plain seam about an inch thick running on the bottom edge and along the front of the sleeve. Both the short and long sleeves have a white pattern stitched on them.
   The flightsuit has no visible pockets.
   The flightsuit has visible, white stitching.
   The knees and inside legs of the flightsuit have reinforcing patches.
   The flightsuit has light weathering across its entirety.
   Flightsuit must match visual references.

Neck seal
   Must be made of the same material and color as the flightsuit.
   The neckseal has visible, white stitching.
   The neckseal has light weathering.
   Neckseal must match visual references.

Flak Vest
   Light tan colored flak vest.
   The flak vest has black leather or faux leather straps on top which run the entire length of the shoulders.
   The flak vest has light weathering across its entirety.
   Flak vest must match visual references.

Cummerbund
   Light brown colored cummerbund that covers the area between the flak vest and belt.
   The front of the cummerbund has a trapezoid flap which extends past the belt.
   Must have piping on both sides.
   The cummerbund has light weathering across its entirety.
   Cummerbund must match visual references.

Boots
   Chelsea style boots.
   Most accurate shoes are Sketchers brand "Blaine Orsen" boots
   Light brown roughout leather or leather like material
   The boots have a stitched on grey leather patch on the inside and brown flap on the front.
   The boots have moderate weathering with several discoloured patches.
   Boots must match visual references.

Chest Armor
   Consists of a solid chest plate with a recessed diamond. The diamond has a recessed middle section.
   The ab plate connects to the chest plate.
   Must appear to be at least 3mm thick with rounded edges.
   The main color of the plates is reddish brown.
   The diamond is painted silver
   All plates must be painted and weathered to match references both in color and weathering pattern.
   Can only feature damage inflicted by mudhorn in episode 3 if the beskar pauldron, damaged thighs and damaged gauntlets are worn.
   All armor must attach securely to the vest.
   Chest armor must match visual references.

Back Armor
   Must appear to be at least 3mm thick with rounded edges.
   The color of the backplate is reddish brown.
   Must be painted and weathered to match references both in color and weathering pattern.
   In addition to his backplate, the Mandalorian wears a black, woollen cape which connects to the chest plate and covers the area between the shoulder plates and neck.
   The cape has a hole in it through which a loop runs that holds the pulse blaster in place.
   back armor must match visual references.

Kidney armor
   Trapezoid shaped plate which attaches to the bottom of the belt.
   Must appear to be at least 3mm thick with rounded edges.
   The color of the plate is reddish brown.
   Must be painted and weathered to match references both in color and weathering pattern.
   Kidney armor must match visual references.

Shoulder Armor
   Must appear to be at least 3mm thick with rounded edges.
   The left shoulder plate is painted reddish brown with a thick rim running along the edge.
   The right shoulder plate is a either shoretrooper style plate which is painted sand yellow with a blue upper section, or a beskar shoulder plate with a raised middle section and edges.
   Must be painted and weathered to match references both in color and weathering pattern.
   shoulder armor must match visual references.

Left knee Armor
   Must appear to be at least 3mm thick with rounded edges.
   Greyish blue modern style kneepad
   Must feature 2 identical silver cylindrical dart launchers on the outside, mounted to a rectangular housing.
   Must be painted and weathered to match references both in color and weathering pattern.
   The kneepad has black elastic strapping in the back.
   Knee armor must match visual references.

Left shin Armor
   Brown leather or leather like armor which runs the entire circumference of the shin.
   The top part has a double band with a small leather pouch on the outside.
   The middle part of the shin armor has a rounded, orange armored plate with a flat front.
   The bottom section of the shin is ribbed.
   Must be painted and weathered to match references both in color and weathering pattern.
   Shin armor must match visual references.

Right shin Armor
   Shoretrooper style shin armor without plastic reinforcing straps
   The color of the shin is dark brown with the top V-shaped part painted reddish brown.
   The shin has 2 leather straps where the original reinforcing straps where located.
   The upper leather strap has 6 loops with blaster charges.
   The shin has a blue and metal distressed knife in it.
   Must be painted and weathered to match references both in color and weathering pattern.
   Shin armor must match visual references.

Left thigh plate
   Must appear to be at least 3mm thick with a thick rim running along the edge.
   The color of the thigh is sand yellow.
   Must feature a canted ridge about 1/4 away from the inner edge.
   Must be painted and weathered to match references both in color and weathering pattern.
   Can only feature damage inflicted by mudhorn in episode 3 if the beskar pauldron, damaged chest plate and damaged gauntlets are worn.
   Thigh armor must match visual references.

Right thigh plate
   Must appear to be at least 3mm thick with a thick rim running along the edge.
   The color of the thigh is reddish brown.
   Must feature a raised bar in the middle
   Must be painted and weathered to match references both in color and weathering pattern.
   Can only feature damage inflicted by mudhorn in episode 3 if the beskar pauldron, damaged chest plate and damaged gauntlets are worn.
   Thigh armor must match visual references.

Hip armor
   Two armored plates are located on the side, below the belt.
   Must appear to be at least 3mm thick with rounded edges.
   The color of the plates is dark blue.
   Must feature a canted ridge running from top to bottom.
   Must be painted and weathered to match references both in color and weathering pattern.
   Hip armor must match visual references.

Left Gauntlet
   The color of the gauntlet  is reddish brown.
   Clamshell style gauntlets without any visible closure method.
   Must feature a silver colored keypad on the wrist with 4 rows of 5 round buttons, of which the 3 center buttons of each row are slightly larger.
   The front of the raised section has a silver detail about 3/4 inch wide.
   Must be painted and weathered to match references both in color and weathering pattern.
   Can only feature damage inflicted by Blurgs in episode 1 if the beskar pauldron is worn.
   Gauntlet must match visual references.

Right Gauntlet
   The color of the gauntlet  is reddish brown.
   Clamshell style gauntlets without any visible closure method.
   The raised section of the gauntlet has a square hole on the front with a heads up display, and a rectangular housing on the back holding 4 silver rockets.
   The right side of the gauntlet has a cilyndrical silver flamethrower.
   Must be painted and weathered to match references both in color and weathering pattern.
   Can only feature damage inflicted by Blurgs in episode 1 if the beskar pauldron is worn.
   Gauntlet must match visual references.

Ammo Belt
   The belt is made from brown leather or leather-like material.
   The left side of the belt has 1 square pouch and a 3 explosive charges in a metal holder.
   Each charge has a red, rounded plastic eye in the middle.
   The right side of the belt has 1 cylindrical pouch and 2 loops with blaster charges
   The belt is closed with a flat, silver buckle which has 2 screws on the front.
   The rear of the belt has an additional 4 loops for blaster charges, 2 on each side.
   The rear of the belt has a square metallic plate to which the bandoleer connects. This plate also has a leather belt loop for the pulse blaster.
   Must feature a brown leather holster for the sidearm.
   Belt must match visual references.

Gloves
   The gloves are leather or leather-like material
   Black finger-less gloves with golden tan fingers.
   The gloves have an off white armor plate with a blue triangle in the center.
   Gloves must match visual references.

Bandoleer
   The belt has an attached bandoleer, which slings across the left shoulder.
   The bandoleer has 6 loops in the middle which contain blaster charges. The second loop from the top is empty.
   The bandoleer has a silver buckle on top, which connects to the sling of the pulse blaster
   Bandoleer must match visual references.

Weapon
   Amban phase-pulse blaster
   The blaster is gun metal with silver accents and a wooden stock
   The forked barrel and body of the rifle have heat discolorations
   Must be painted and weathered to match references in color and weathering pattern.
   Weapon must match visual references.

Sidearm
   Based on a Bergmann 1896 pistol
   Features a silver-black conical muzzle
   Sidearm must match visual references.

« Last Edit: Jan 29, 2020, 05:42 PM by bernie » Logged
 


Don't like ads? Help support the Mercs by becoming a Supporter or Auxiliary Member today!
Official Members also get to use the forum ad-free - so kit up and join us!




Powered by EzPortal