Helmet:

  • Heavy infantry mandalorian style helmet.
  • Must be sized correctly in proportion to wearer’s body.
  • Must have a black tinted visor that completely obscures the wearer’s face.
  • The helmet’s main color is baltic blue, with light blue inner cheeks and faceplate.
  • Must feature a heavily weathered ridge that runs the length of the dome of the helmet.
  • The rear of the dome extends slightly further than the back of the helmet.
  • Must feature 2 triangular slots over the right side of the brow.
  • The helmet has rectangular earcaps on both sides. Both earcaps have vents on the front and rear and are painted silver with gunmetal accents.
  • The left earcap features a U-shaped rangefinder painted gunmetal grey. The rangefinder is connected with a stepped section to the earcap.
  • Back of the helmet features a rectangular box with 5 keyslots and a round vent at the top.
  • Helmet must be painted and weathered to match references both in color and weathering pattern.

Flight Suit:

  • Must be a cotton or cotton blend one or two-piece garment colored black and must fit snuggly to the wearer.
  • Must feature double sleeves, where the longer sleeve is ribbed and colored light grey.
  • Must feature light grey, ribbed breeches which cover the pants and and upper leg part of the black flightsuit.
  • The flightsuit has no visible pockets.
  • The flightsuit has visible, white stitching.
  • The flightsuit has light, brown stained weathering across its entirety.

Neck seal:

  • Must be made of the same material and color as the flightsuit.
  • The neckseal has visible, white stitching.
  • The neckseal has light weathering.
  • Neckseal must match visual references.

Boots:

  • Chelsea style boots.
  • Most accurate shoes are Sketchers brand “Blaine Orsen” boots.
  • Dark brown roughout leather or leather like material.
  • Must feature a baltic blue armored plate on the toe.
  • Armored plate must feature three center ribs and raised edge.
  • Boots must match visual references.

Chest Armor:

  • One piece chestplate painted baltic blue with a silver and gunmetal grey diamond.
  • Must be appropriately sized to the body of the wearer.
  • The diamond sits flush with the chest plate and has a groove running along its length.
  • The inner part of the diamond must feature a raised, rectangular part, of which the bottom half is grooved.
  • On the left of the diamond are two trapezoid, gunmetal grey details.
  • Top right of the chest plate must feature a gunmetal grey vent. This vent sits just below the shoulder straps.
  • Must feature a separate ab plate composed of two pieces. The top piece is a smooth piece with a raised section running the top length and sits just below the chest plate. The bottom piece is a rectangular piece with ribs about 2” wide running along its width.
  • Must feature armored straps on the shoulders.
  • Chest plates must be painted and weathered to match references both in color and weathering pattern.

Back Armor:

  • One piece back armor which attaches to the armored shoulder straps.
  • Must be painted baltic blue.
  • Must feature a raised middle bar in the centre to which the jetpack attaches.
  • Must be painted and weathered to match references both in color and weathering pattern.

Right Shoulder Armor:

  • Bell shaped shoulder plate painted baltic blue.
  • Must have a yellow ochre bicep plate.
  • Yellow bicep plate must feature a raised edge and raised center rib.
  • Must feature a black mythosaur in the center.
  • Must be painted and weathered to match references both in color and weathering pattern.

Left Shoulder Armor:

  • Bell shaped shoulder plate painted baltic blue.
  • Must have a baltic blue bicep plate with raised edges.
  • Shoulder plate must feature a raised center rib which stops halfway, flanked by 2 raised ribs on each side.
  • Must be painted and weathered to match references both in color and weathering pattern.

Elbow armor:

  • Squarish oval shaped elbow plates painted baltic blue.
  • The elbow plates have no visible attachment method.

Cod Armor:

  • Ellipse shaped codpiece painted baltic blue.
  • Must feature 2 square plates at the top, just below the belt.
  • Top of the codpiece is hidden by the belt.
  • Must be painted and weathered to match references both in color and weathering pattern.

Left thigh armor:

  • Box shaped thigh armor featuring a raised center and cut-off corners.
  • Must feature a raised edge on the central part.
  • Must curve around the wearers thigh without any visible attachment methods.
  • Must be painted and weathered to match references both in color and weathering pattern.

Right thigh armor:

  • Box shaped thigh armor featuring a raised center and cut-off corners.
  • Must feature a square rim on the central part.
  • Must curve around the wearers thigh without any visible attachment methods.
  • Must be painted and weathered to match references both in color and weathering pattern.

Left knee Armor:

  • Box shaped knee plate with a raised center and cut-off corners.
  • Knee plate is painted yellow ochre.
  • Must feature a wing on each side of the knee plate.
  • The knee plate has no visible attachment method.
  • The left plate features a raised edge and a center cutout.
  • Must be painted and weathered to match references both in color and weathering pattern.

Right knee Armor:

  • Trapezoid box shaped knee plate with a raised center.
  • Knee plate is painted yellow ochre.
  • Must feature a wing on each side of the knee plate.
  • The knee plate has no visible attachment method.
  • Must be painted and weathered to match references both in color and weathering pattern.

Left shin armor:

  • Cylindrical shaped shin armor which covers the entire lower leg area.
  • Must be painted baltic blue.
  • Must feature a raised rib on top and a raised front plate.
  • Must feature an armored plate with a raised edge and curved sides covering the top of the boot and bottom of the shin armor. The armored plate must be painted yellow ochre.

Right shin armor:

  • Cylindrical shaped shin armor with a narrower bottom section which covers the entire lower leg area.
  • Must be painted yellow ochre with a narrow brown band at the top of the narrow section.
  • Must feature a raised section on top that extends past the main body of the shin.
  • Must feature  a raised rib at the front which stops just above the narrow section.
  • Must feature a flat armored plate with curved sides covering the top of the boot and bottom of the shin armor. The armored plate must be painted yellow ochre.

Left Gauntlet:

  • Must be painted yellow ochre.
  • Clamshell without any visible closure method.
  • Must feature a calculator pad on the rear right side of the gauntlet.
  • Must feature a raised centre section consisting of three stepped parts. The raised centre has 2 grooves running its length.
  • Must feature a large box on the left side with a cylindrical barrel at the front.
  • Barrel must feature three vents on each side and has heat discoloration.
  • The gauntlet must have a light grey fabric covered hose extending from the box which slides into the short sleeve of the flightsuit.
  • Must be painted and weathered to match references both in color and weathering pattern.

Right Gauntlet:

  • Must be painted reddish brown.
  • Clamshell without any visible closure method.
  • Must feature a raised centre section consisting of three stepped parts. The first two parts feature a centre groove.
  • Must feature a silver and red, cylindrical shaped flamethrower on the second part of the raised section, located on the left side.
  • Must be painted and weathered to match references both in color and weathering pattern.

Jetpack:

  • Yellow ochre painted jetpack, with dark red, silver and black details.
  • The jetpack consists out of a centre trapezoid part flanked by two additional thrusters.
  • Centre part must feature a yellow and black painted cylinder which connects to the ammo tube of the main weapon.
  • Must feature three silver cones on top with a flat top. The centre cone is about half the size of the other two.
  • Jetpack must fit snugly against the back plate without sagging.
  • Must be painted and weathered to match references both in color and weathering pattern.

Ammo Belt:

  • Dark brown belt made from leather or leather-like material.
  • Belt must feature a silver C-shaped buckle.
  • Must feature four large, rectangular pouches on each side.
  • Must feature a large tube shaped pouch on the inner side of the innermost right pouch.
  • Must feature two belt loops at the front, both holding a black, square greeblie. The right belt loop must feature a silver detail on front.

Kama:

  • Russet brown colored kama made from cotton or cotton blend material.
  • The kama sits under the belt, covering its top part.
  • Must be frayed at the bottom.

Gloves:

  • Black leather leather-like gloves.
  • Must feature a trapezoid shaped armored plate painted on each glove. The left armored plate is painted reddish brown, the right is painted light blue.

Weapon:

  • Large, three barreled blaster rifle.
  • The blaster is painted gunmetal grey with silver and black detailing.
  • Must feature three DC-17 barrels minus the T-strips.
  • The barrels must feature heat discoloration at the muzzle.
  • Must attach to the central cylinder of the jetpack via a segmented ammo tube.
  • Must be painted and weathered to match references in color and weathering pattern.