Helmet

  • Dome and brow band and must be painted purple with grey in the design as shown to match visual references.
  • Rear brow band and keyslots must be painted yellow.
  • Upper cheeks must be painted grey.
  • Mandibles must be painted dark purple to match references.
  • The rear panels and lower cheeks must be painted khaki-grey.
  • The right ear must be painted light grey with a purple oval earcap to match references.
  • The left ear must be painted yellow to match with a raised cylinder painted light grey.
  • The dome of the helmet must feature a stylized design in accordance with visual references.
  • Must feature a metallic range finder stalk with an accurate rangefinder topper with a grey lens greeblie on top of the rangefinder.
  • The top portion of the rangefinder must be painted dark purple and the bottom portion must be painted black.
  • Must be weathered to match visual references.

 

Flight Suit

  • Must be a jumpsuit or two-piece suit with both the top and pants being black/ dark charcoal grey with a medium grey pattern to match references.
  • The top must be long sleeved and the pants must be able to tuck into the boots.
  • Top must have a raised collar with a shallow “V split” in the front

 

Chest Armor

  • Consists of segmented collar armor, right and left chest plates, and center diamond.
  • Must appear to be at least 3mm thick.
  • Chest plates, collar plates, and center diamond must be painted purple and yellow with additional colors to match designs and visual references.
  • Left chest piece is purple with a yellow Rebel starbird that is surrounded by three concentric circles of the same color, all splattered in red paint.
  • Right chest piece is now purple with two yellow stripes running across the upper right corner.
  • Center diamond must be yellow to match references.
  • Segmented collar must be painted to match visual references and have accurate designs.
  • All plates must be painted and weathered to match references both in color and weathering pattern.
  • All armor must attach securely to the top with proper spacing and be appropriately sized to the wearer.

 

Shoulder Armor

  • Must appear to be at least 3mm thick. Must have four points and must curve around the upper arm and shoulder.
  • Right shoulder must be yellow-orange with light grey / faded checker pattern border and features the stylized burgundy “5” design.
  • Left shoulder must be yellow-orange with a light grey owl outlined in purple with pale purple cheeks sitting on a green center.  Must be painted with accurate colors to match visual references.
  • The owl emblem  is approximately half the size of the season 3 emblem of the same style.
  • Must be painted and weathered to match references both in color and weathering pattern.

 

Elbow Armor

  • Must appear to be at least 3mm thick.
  • Must be painted orange with burgundy and silver weathering to match visual references.
  • Must be two plates that connect when the arm is straightened and separate when the arm is bent.
  • Must be painted and weathered to match references

 

Knee Armor

  • Must appear to be at least 3mm thick.
  • Must be purple with rust color and silver paint damage to match visual references.
  • Right knee armor plate must feature a yellow stripe.
  • Left knee armor plate must feature orange and silver damage.
  • Must be painted and weathered to match references

 

Shin Armor

  • Must appear to be at least 3mm thick.
  • Must be painted purple with reddish-orange paint damage to match visual references.
  • Must have a cutout for the knee armor.
  • Both left and right pieces are purple with little rust colored weathering. The left shin plate has two yellow lines running from the sides of the plate, down to meet the two left ankle plate lines. The left piece also has two small red orange rectangles near the top of the armor. Weathered to match references.

 

Boot Armor

  • Must appear to be at least 3mm thick.
  • Must appear to connect to the shin armor.
  • Both left and right pieces are purple with light rust colored weathering. The left ankle plate has two yellow lines running down the ankle and across the bottom that meet at the yellow lines on the shin armor. Weathered to match references.

 

Boots

  • Must be made of black or dark charcoal leather or leather like material
  • Must have a black or dark charcoal wedge sole
  • Must be high enough to stop just below the knee.
  • Must be weathered and paint splattered to match references.

 

Leg Flares

  • Must feature 18 silver/grey flares stored in brown leather/leather-like loops that wrap around each calf.
  • Must be worn about 2-3 inches below the knee cutout on the shin armor.
  • Flares and leather loops must be made to match references in color, scale, and construction.

 

Holster Belt

  • Must be a medium brown leather or leather like material that secures via metal rectangular buckle in front.
  • Must feature 2 drop holsters with an angular design
  • The front holster straps must feature two rivets in a vertical line near the holster.
  • Must have two metallic loops on either side of the belt buckle with the holster connecting between the buckle and the loop.
  • Must feature two horizontal metallic loops where the holster connects to the belt in the back.

 

Ammo Belt

  • Belt features a silver rectangular buckle
  • Must feature a left and a right rectangular hip pouches made in the same material as the belt.
  • Must feature a droid caller-style communication device affixed vertically on the left side between the buckle and the pouch.
  • Must feature 3 rectangular ammo pouches on the back of the belt.

 

Gloves

  • Must be black or dark charcoal leather or leather-like material and a fingerless style.
  • Must tuck into the sleeves so that there is no skin between the garments.
  • Must be weathered and paint splattered to match references.

 

Hand Armor

  • Armor pieces must have 6 points and must be constructed to match references.
  • Any attachment method must be hidden.
  • Must be purple with orange and silver weathering to match references.
  • Right hand armor piece must have a slanted red stripe and left armor piece must have orange paint detailing painted to match references.
  • Must be weathered and paint splattered to match references.

 

Gauntlets

  • Must be painted dark grey and weathered to match references.
  • Must be illuminated or have the appearance of being illuminated by painting or using a similar means to accurately portray the gauntlet electronics.
  • Right gauntlet must feature a raised weapon platform that houses one gauntet rocket and two flamethrowers. One flamethrower must be mounted on either side of the rocket.
  • Left Gauntlet must feature a raised weapon/interface platform with a small green illuminated screen built in and an illuminated red button mounted above the screen. Must also feature 3 silver darts mounted to the front-facing vertical side of the raised platform.

 

Westar-35 Pistols

  • Animated Clone Wars style pistols.
  • Must be a mismatched pair with one being painted blue, black, and grey, and the other painted grey, black, and orange.
  • Must be painted and weathered to match references in color and weathering pattern.

 

Hair/Wig

  • Must be longer on the right side and cut shorter on the left and styled to match references. The hair is dark brown and with purple/blue tips.

 

Jetpack (Optional)

  • Jetpack must be constructed to match visual materials. Must feature a black central tube flanked by two “wings” painted bright neon purple with dark purple “wings” spread out across the back, traced in silver with red details.

 

Paint Sprayer (Optional)

  • Must be constructed to match visual references.
  • Must feature a red rocker switch on the front of the device.
  • Must feature a silver paint canister in the back.
  • Must feature 5 round, silver push buttons on the left side.
  • Must be painted, weathered, and paint splattered to match visual references.

 

Commlink

  • The commlink itself is similar to that seen in the original trilogy films but is a longer and silver and black in color. The commlink is almost entirely hidden by the leather holder that should match the belt material and should rests in the cylindrical holder on the left side.