Don't like ads? Help support the Mercs by becoming a Supporter or Auxiliary Member today!
Official Members also get to use the forum ad-free - so kit up and join us!

 Brett's protector wip

  • 879 Replies
  • 99518 Views
Re: Brett's protector wip
« Reply #795 on: Nov 28, 2020, 10:15 AM »
It looks like your test turned out pretty well!
All that's involved is heat it up and quench in oil
Couldn't really sleep last night so looked around at things to do. Found an old light for the beacon, hooked up to a remote to allow switching on or off, need to work out where I'd put the switch now, and type of switch for when I get thrusters to rotate

Also found this cheap small screwdriver set....thinking I could remove the internals and use as hip/thigh pouch filler....maybe a med kit or toxin/ anti toxin tool kit


Also a small servo and a tiny motor with long screw ....hhmmmm wonder what I could use that for 🤔

Bit of clean up work around the range finder pivot point, the rf stalk is a little thick and prevents the cap sitting flush and the resin wasn't 100% flat. Filing flat to allow the stalk to move freely and also looking at installing a servo. I'd bought a low profile ones few years ago but didn't really get around to installing


« Last Edit: Nov 28, 2020, 06:23 PM by The Unknown Mando » Logged

ConDar Ward


    *
  • *
  • *
  • *
  • 7843
  • Al'jurir be Ori'ramikad
  • Awards Order of the Ori'Ramikad Award for 10 official invasions. Clan with the most recorded invasions in 2016/2017 Clan with the largest number of new OM's in 12 months Celebration Orlando 2017
Re: Brett's protector wip
« Reply #796 on: Nov 28, 2020, 09:15 PM »
 :like: Excellent work .. 

Logged

MMCC-#0059 /M.A.- 001 /M.A.D.- 067 /ALUMINATI -013
 Ni su'cuyi, gar kyr'adyc, ni partayli, gar darasuum - Remo Jadd - 0267
Re: Brett's protector wip
« Reply #797 on: Nov 29, 2020, 04:19 AM »
:like: Excellent work .. 
Thanks mate...riding a wave of enthusiasm at the moment, getting a little organised and the mind feels the best it's been in along time

Logged

Mi'ix


    *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • 4446
  • Ideals are peaceful. History is violent.
  • Awards Award for 75 official invasions. Brigades Order of the Ori'Ramikad Celebration Chicago Boba and Jango
Re: Brett's protector wip
« Reply #798 on: Nov 30, 2020, 08:41 AM »
Man, I love that little light in the beacon!

Logged
Legends - Protector 
Canon - ESB Boba Fett

Mandalorian Mercs Brigade Application Form

BH/TI/TS/MW 65041

Tra'cor Clan || M.V.S. #41|| M.A.B.E.L. #60 || 72 Official Invasions

Breyo Fey


    *
  • *
  • *
  • *
  • 347
  • "An par aliit. Ner tal. Ner oyay."
  • Awards 6 or more Education Points in a single year. 15+ clan level invasions 6 or more Education Points in a single year. Family events Mandalorian Protector Brigade Member
Re: Brett's protector wip
« Reply #799 on: Nov 30, 2020, 12:37 PM »
SO much cool stuff!
Really nice job!

Logged
Re: Brett's protector wip
« Reply #800 on: Nov 30, 2020, 01:48 PM »
Man, I love that little light in the beacon!
I got that off TDH years ago...I think it was one of JC27 kits...there are other flashing kits out there. You can get flashing LEDs now, not sure if they give the same look though. I've seen LEDs with tiny circuit on the anode or cathode leg that made them flash, can't find a tiny circuit board that made a LED flash...all cheap too
SO much cool stuff!
Really nice job!
Thanks Breyo.....hopefully more cool stuff to come  :laugh:....need to finish this stuff first

Logged
Re: Brett's protector wip
« Reply #801 on: Nov 30, 2020, 09:54 PM »
Love the light man

Logged
Re: Brett's protector wip
« Reply #802 on: Dec 01, 2020, 05:27 PM »
Love the light man
Thanks mate, I may try for better lighting soon...jp may be more complete

Logged
Re: Brett's protector wip
« Reply #803 on: Dec 02, 2020, 07:06 PM »
Making abit of progress....woke up early today so had a bit of a play on lathe...not quite the same..I need to shorten the back end and add separating rings....the sort out how to add fins and want material to use

And maybe....
Similar


Also got a dlt20 from April storm on its way, add that to the list of things to do  :laugh:, still need to make a Jodo style ee3...add that to modded e11, dl44, will make a sacros ....few of those should Help create a mythos vibe

« Last Edit: Dec 02, 2020, 07:43 PM by The Unknown Mando » Logged

Fenn Beviin


    *
  • *
  • *
  • *
  • 1878
  • MMCC #: 2116
  • Awards Mandalorian Protector Brigade Member
Re: Brett's protector wip
« Reply #804 on: Dec 03, 2020, 02:16 PM »
Doooooooooooooooooooooooooooooooooooooooooooope  :like:

Logged
"Try not to become a man of success, but a man of value."

Instagram: mythos_fenn_shysa

Mythos Fenn Arms (A Sales Thread): https://mandalorianmercs.org/forum/index.php?topic=174182.msg2066382#new

Fenn Shysa WIP: http://mandalorianmercs.org/forum/index.php?topic=80765.0

SEE-5 blaster pistol and misc blasters: http://mandalorianmercs.org/forum/index.php?topic=110659.msg1820500
Re: Brett's protector wip
« Reply #805 on: Dec 03, 2020, 03:40 PM »
Doooooooooooooooooooooooooooooooooooooooooooope  :like:
:laugh: thanks mate ...stay tuned....for

Fixed the taper and shortened the rear...could do with better polish....but I may try a anodising again, still needs fins added
Sort of thinking archery plastic vines...maybe colour indicates purpose. In the comic "twin engines of destruction" these were fired at a bounty...not explosives but tranquillisers

« Last Edit: Dec 03, 2020, 07:31 PM by The Unknown Mando » Logged

Fenn Beviin


    *
  • *
  • *
  • *
  • 1878
  • MMCC #: 2116
  • Awards Mandalorian Protector Brigade Member
Re: Brett's protector wip
« Reply #806 on: Dec 04, 2020, 12:26 PM »
This is amazing man. Once you refine the process, you could make some good money selling these. Set you up a shop like MachineCraft Replicas  :like:

Logged
"Try not to become a man of success, but a man of value."

Instagram: mythos_fenn_shysa

Mythos Fenn Arms (A Sales Thread): https://mandalorianmercs.org/forum/index.php?topic=174182.msg2066382#new

Fenn Shysa WIP: http://mandalorianmercs.org/forum/index.php?topic=80765.0

SEE-5 blaster pistol and misc blasters: http://mandalorianmercs.org/forum/index.php?topic=110659.msg1820500
Re: Brett's protector wip
« Reply #807 on: Dec 04, 2020, 02:49 PM »
This is amazing man. Once you refine the process, you could make some good money selling these. Set you up a shop like MachineCraft Replicas  :like:
Thanks mate, definitely will need to refine. May be an option in the future.... 🤔 not sure how many would like Jodo rockets though  :laugh: need to look at finishing other stuff
had ideas of making these in 3 sections...steel and aluminium too
I'll try to may a rocket like this pic

Still can't think of the site it was on....called a merr-sonn mm7 or mm9 ...not much info
What would be other suggestions to look at making?

« Last Edit: Dec 04, 2020, 02:55 PM by The Unknown Mando » Logged

jett drexel


    *
  • 2129
  • a long time ago in a living room far far away...
Re: Brett's protector wip
« Reply #808 on: Dec 05, 2020, 02:11 PM »
knee darts, jet pack stabilizer, imperial code cylinders.... flash suppressors for blasters, leg flares, jodo style r.p.g.'s , cryo grenades.... anything you can imagine really.

Logged
Re: Brett's protector wip
« Reply #809 on: Dec 05, 2020, 09:17 PM »
knee darts, jet pack stabilizer, imperial code cylinders.... flash suppressors for blasters, leg flares, jodo style r.p.g.'s , cryo grenades.... anything you can imagine really.
I‘all def have To have a look into things

Logged
 


Don't like ads? Help support the Mercs by becoming a Supporter or Auxiliary Member today!
Official Members also get to use the forum ad-free - so kit up and join us!




Powered by EzPortal