activation email

[Vercopaanir]

The layers are looking good!

[Mando727]

Update - As we are nearing Megacon Orlando its crunch time. Nearly finished the upper armor with the exception of the bucket and back plate. The bucket is arriving today as the previous one I had posted was too small with my padding. Tasset plates and knee plates will be here today as well. I will have 3 weeks to finish the bucket, tasset plates, knee armor and back plate so we'll see. The iron heart for the chest plate will be primed today and I should have that done by mid-week. Will update once completed.

Feedback would be amazing on the weathering and blackwash (or perhaps lack thereof?) Looking at a lot of armor I see the blackwash being done on the edges and all cracks/crevices, I wonder if the gauntlets need more? Also, the electronic boxes on the gauntlets are almost a chrome like finish, wondering if I should paint them gray like the rest of the armor? Any and all feedback is appreciated, thanks!

[Vercopaanir]

Personally I'd love to see a little more weathering on the gauntlets but you've kept it pretty consistent with the rest of the pieces.  As far as the color goes, that's more of a personal choice.  The chrome finish does make those items stand out more.  I personally would be inclined to paint them but as I stated earlier, that is entirely up to you.

[Mando727]

Understood, would you recommend more paint chipping or would more of the black/brown wash be acceptable for the gauntlets?

[Mando727]

This will serve as a massive update for the progress of the kit. Based upon feedback received this past weekend I need to fix some fitment issues as well as do the entirety of the soft part weathering. Any and ALL feedback is greatly appreciated!! I was also told by a member that my all my armor needs to be re-black/brown washed and then clear coated again with matte clear coat. I know what I want it to look like but am having a hard time getting it there. As i mentioned above any and all help is very much appreciated. Thank you!

[Vercopaanir]

I totally missed your question 

Sounds like you got some good advice. I'm also fairly certain I saw you a MegaCon.  Not sure we ended up in a pic together, but I was one of the two aqualorians  wandering around the booth.

Looking forward to seeing the updates!

[Geloberizk]

A amazing start, I especially love the colors and the gauntlets you got! Very very good, I look forward to seeing more from this!

[Mando727]

Update:

To make sure I am in accordance with the CRL's for post-imperial I have added two thigh plates. Pictured below. I also weathered the flightsuit and flak vest. The photos I took below were sent to my Ruusalor for a kind "pre" pre-application and my fix list was this:

1. Need balaclava
2. Chest plate was off center, needs to be centered.
3. Knee armor is sagging, needs to be straight and even
4. Thigh plates floating a bit at the tops, maybe layer them underneath the holsters
5. Back plate bottom corners are floating, need to lay flat/flush with flack vest
6. No microphone for application photos - remove it.

I have addressed everything with the exception of the back plate issue. (I tried to use a heat gun and may have ruined it . We'll see. I am going to sew in some magnets for the back plate to connect to, so it lays flatter. I will be finishing this in the next few days and post an update.

If anyone else is glaring or needs to fixed please let me know!! Thanks and I look forward to updating in the next few days then on to Pre-App!!

[Mando727]

Update

This will serve as a massive update from my Pre-app fixes. Flightsuit (jacket and pants), vest, belt, belt items, gloves and boots all received additional weathering. See photos below.
For the flight jacket, pants, vest and gloves I used various colors (ochre sand, grey and mars black) in an airbrush and then heat treated them to make sure they will be permanent.

[Mando727]

Update Continued

On the belt I started with some sandpaper on the common wear spots like the holster edges, top and bottom edges of the belt and did some in the flat area to blend in the leather veins giving it a whitish wear look. Other areas I used some dry brush acrylic with a greyish silver color.







Moving to the cartridges and buckles I used agrax and nuln oil on them after hitting the bare metal with coarse sand paper.





Finally on the boots I started with a bit finer grit sand paper (320) as to achieve a scrapped look but still preserve the leather then used dry brush acrlic paint in wear areas like the creases on the top and finally used the airbrush to spray a light grey/white color on any heavy use areas that would crease. This was also heat treated using a heat gun to lock it in. In additional I did walk with them and kick, scrape and drag my feet on the pavement so they do have a bit finer of wear but i'm not sure how well the photo picks it up.




Any and all feedback is certainly appreciated!!

[Mando727]

Update:

I have re-weathered all my soft goods and addressed the floating thigh plates per feedback from my most recent pre-app post. Please see photos below.

Flight jacket


Before and after flightsuit weathering - top one is before weathering, bottom sleeve is after updated weathering.


Flight pants front and back



Vest



Gloves


Boots


Belt and Holster




Thigh Armor Float fix
Left Side




Right Side