Don't like ads? Help support the Mercs by becoming a Supporter or Auxiliary Member today!
Official Members also get to use the forum ad-free - so kit up and join us!

 Harness Systems

  • 19 Replies
  • 13880 Views

IronMando


    *
  • *
  • 8036
  • Doofus
  • Awards 15+ clan level invasions Award for 50 official invasions. Recruitment - Clan with the largest number of new OM's in 12 months Award for 25 official invasions. Award for 10 official invasions.
Harness Systems
« on: Jun 26, 2008, 07:59 PM »
Don't know if this belongs here or the soft parts forum, but I'll be constructing my harness soon and I was wondering if you had pics you'd like to share. Also I want to see if there are different styles that have been made, or if everyone shares a fairly consistent style. Also, how do you attach clips to your pack? Directly, or do you have some slack with straps?

Logged
Mandalorian Merc # 0294
"I was blue before you."

Dar'manda


    *
  • *
  • 12699
  • Awards Order of the Ori'Ramikad Award for 10 official invasions. Award for 25 official invasions. Hard Contact - Clan with the most recorded invasions
Re: Harness Systems
« Reply #1 on: Jul 01, 2008, 09:29 AM »
I would post up pics of mine...but I cut it all up to use the straps after I ditched the pack.  I'll see if I can't draw up something to explain how I made mine.

Logged

Dar'manda


    *
  • *
  • 12699
  • Awards Order of the Ori'Ramikad Award for 10 official invasions. Award for 25 official invasions. Hard Contact - Clan with the most recorded invasions
Re: Harness Systems
« Reply #2 on: Jul 01, 2008, 09:54 AM »
Ok, got something for ya.



Basically...go buy a couple yards worth of 1 inch strapping (found near fasteners at Joanns).  Take the piece of strapping and wrap it around your chest just under your pecks (so it's on your rib cage) and have it meet in the middle.  Give yourself about 2 inches on one side extra and 6 inches on the other side extra.  Pick up 3 clip kits (found near the strapping).  Feed both sides into their respective clips, sew the one with 2 extra inches down to itself so that it stays attached.  The other side with the 6 inches is your "adjustment side" that allows you to pull the strap tight across your chest.

Make sure you use a lighter on the ends of all your cuts so the strap doesn't fray.  Just burn it for a couple of seconds and wait until it cools before you touch it.

Now, put the chest strap on, and tighten it up.  Make sure the chest clip is centered.

Take another strap piece and pin it to the front of the chest strap so that it lays up over your shoulder and down your back.  Where you pin it in the front is where it will be sewn.  Now, mark where it hits the back of the chest strap and cut it off there.  Pin it to the back of the chest strap so it now looks like suspenders attached to your chest strap.  You'll sew that strap there and repeat for the other shoulder strap.

Congrats, now you have a man bra.

Ok, now after you've sewn all that, put it back on again, tighten it up.  Take a small piece and sew it across the back as a "reinforcer bar", basically keeping the shoulder straps from falling apart.

Now, with the leftover clips (should have 2 sets) one side will attach to your backpack...that will vary on how your pack is made...but the best way is to sew a small piece of the strapping to one side of the clip and screw and glue it down to the pack (I can get a pic of this later when I get home).

The other side of the clips need to be put onto the harness.  Take two 6-8 inch strips of strapping and sew them just above the "reinforcer bar" or whereever you want the pack to hang.  Keep in mind that where you sew determines how far up they adjust.  So just above the shoulder blades is probably the best place.  Only sew about 1 to 1 1/2 inches of the strap to the harness with the rest hanging down towards the floor.  Feed your clip onto this and you should be finished.

The vest will need holes cut in the back for the clips.  Best way to do this is to wear the harness, ajust the "back clips" as tight as they can go, then put the vest on over top.  Have someone feel where the clips are and then mark out a small rectangle hole for the clips.  Cut that out and sew around the hole to prevent fraying.  Then put it all on.

Before someone zips up the vest, they'll need to push the clips through the holes in the vest.  Adjust the back clips so they hang down a bit.  Then clip the pack into place and pull the straps on the back clip until it's tight.

That should hold everything in place.

If your backpack is too heavy, this technique may not work for you.  This will only support a certain amount of weight...but I know that it worked for Runi Netra and his big "sandtrooper style" backpack as I helped him make the harness.

Hope that helps.

Logged

IronMando


    *
  • *
  • 8036
  • Doofus
  • Awards 15+ clan level invasions Award for 50 official invasions. Recruitment - Clan with the largest number of new OM's in 12 months Award for 25 official invasions. Award for 10 official invasions.
Re: Harness Systems
« Reply #3 on: Jul 02, 2008, 01:36 PM »
Wow... that's a lot to read and I don't exactly have the time. But I will say what I had in mind: I've got some strapping around here somewhere, and yesterday I picked up picture hangers of all things. I plan to screw those into the pack, and then carribeaner them to the harness.

Logged
Mandalorian Merc # 0294
"I was blue before you."

Dar'manda


    *
  • *
  • 12699
  • Awards Order of the Ori'Ramikad Award for 10 official invasions. Award for 25 official invasions. Hard Contact - Clan with the most recorded invasions
Re: Harness Systems
« Reply #4 on: Jul 02, 2008, 02:06 PM »
The harness system I posted then should work just about the same.  Just swap out the 2 extra clip sets for your caribeaners.

Logged
Re: Harness Systems
« Reply #5 on: Jul 02, 2008, 02:24 PM »
Ah, and now for the ultimate test of the Burninator's instructions....does it work for a girl? (yes there is a reason for me asking, I swear I'm not just trying to be difficult)

Dar'manda


    *
  • *
  • 12699
  • Awards Order of the Ori'Ramikad Award for 10 official invasions. Award for 25 official invasions. Hard Contact - Clan with the most recorded invasions
Re: Harness Systems
« Reply #6 on: Jul 02, 2008, 02:51 PM »
I couldn't say for sure, but I don't see how they wouldn't with a little modification.  I suppose you'd have to change up the position of the shoulder straps so they don't cut right across your front...basically moving them more off to the sides or closer to the middle.

Although, for what it's worth...I don't have the most muscular chest...if you catch my drift...and don't have any problems with the design.

Logged
Re: Harness Systems
« Reply #7 on: Jul 02, 2008, 03:29 PM »
Lol, gotcha....thanks!

Racin *OUCH* Falco


    *
  • *
  • 754
  • Solus Nynir , Solus Kyr'amur
Re: Harness Systems
« Reply #8 on: Aug 17, 2008, 10:36 PM »
Just stared this tonight, and promptly ran outta strapping ( bought 2.5 yards of it) and I'm a rather small framed dude. Also have to finish he JP, but great help Tag :)  ;D

Logged
"Hinge Boob Cups and Butt Capes"

Frost K'Amon


    *
  • *
  • *
  • *
  • 2371
  • We will bury them!
  • Awards Award for 10 official invasions. Special Operations Brigade Member Heed the Call - helped the MMCC at a Star Wars Celebration Hard Contact - Clan with the most recorded invasions
Re: Harness Systems
« Reply #9 on: Aug 18, 2008, 12:47 AM »
Well, having made several different harnesses for my wing pack, I've officially decided there is only one truely good way to do a comfortable and workable harness for a good JP.

An old backpack. you cut the actual pack part off, leaving the straps and the cloth backing supporting them, and then attach that to the inside of the pack. it requires slightly more space in your vest, BUT it's immensely more comfortable, and will be much easier to make.

I find that nylon webbing (currently employed on my pack), hurts your shoulders, back, and even hips after a while pending on what your pack is made out of.

IronMando


    *
  • *
  • 8036
  • Doofus
  • Awards 15+ clan level invasions Award for 50 official invasions. Recruitment - Clan with the largest number of new OM's in 12 months Award for 25 official invasions. Award for 10 official invasions.
Re: Harness Systems
« Reply #10 on: Aug 18, 2008, 01:01 AM »
Hmm, my pack (unless I give it to someone else) is light enough I was thinking of just attaching it to my backplate. But idk... it might not be light enough.

Logged
Mandalorian Merc # 0294
"I was blue before you."
Re: Harness Systems
« Reply #11 on: Feb 24, 2009, 10:49 AM »
Oya, it work lurvally...used it on my backpack.  It works for girls, I reapeat, it works for girls! :D

NjovrahRhaad


    *
  • 4
  • Bounty hunters go after kids, too!
Re: Harness Systems
« Reply #12 on: Jan 29, 2010, 04:41 PM »
Ok, got something for ya.



Basically...go buy a couple yards worth of 1 inch strapping (found near fasteners at Joanns).  Take the piece of strapping and wrap it around your chest just under your pecks (so it's on your rib cage) and have it meet in the middle.  Give yourself about 2 inches on one side extra and 6 inches on the other side extra.  Pick up 3 clip kits (found near the strapping).  Feed both sides into their respective clips, sew the one with 2 extra inches down to itself so that it stays attached.  The other side with the 6 inches is your "adjustment side" that allows you to pull the strap tight across your chest.

Make sure you use a lighter on the ends of all your cuts so the strap doesn't fray.  Just burn it for a couple of seconds and wait until it cools before you touch it.

Now, put the chest strap on, and tighten it up.  Make sure the chest clip is centered.

Take another strap piece and pin it to the front of the chest strap so that it lays up over your shoulder and down your back.  Where you pin it in the front is where it will be sewn.  Now, mark where it hits the back of the chest strap and cut it off there.  Pin it to the back of the chest strap so it now looks like suspenders attached to your chest strap.  You'll sew that strap there and repeat for the other shoulder strap.

Congrats, now you have a man bra.

Ok, now after you've sewn all that, put it back on again, tighten it up.  Take a small piece and sew it across the back as a "reinforcer bar", basically keeping the shoulder straps from falling apart.

Now, with the leftover clips (should have 2 sets) one side will attach to your backpack...that will vary on how your pack is made...but the best way is to sew a small piece of the strapping to one side of the clip and screw and glue it down to the pack (I can get a pic of this later when I get home).

The other side of the clips need to be put onto the harness.  Take two 6-8 inch strips of strapping and sew them just above the "reinforcer bar" or whereever you want the pack to hang.  Keep in mind that where you sew determines how far up they adjust.  So just above the shoulder blades is probably the best place.  Only sew about 1 to 1 1/2 inches of the strap to the harness with the rest hanging down towards the floor.  Feed your clip onto this and you should be finished.

The vest will need holes cut in the back for the clips.  Best way to do this is to wear the harness, ajust the "back clips" as tight as they can go, then put the vest on over top.  Have someone feel where the clips are and then mark out a small rectangle hole for the clips.  Cut that out and sew around the hole to prevent fraying.  Then put it all on.

Before someone zips up the vest, they'll need to push the clips through the holes in the vest.  Adjust the back clips so they hang down a bit.  Then clip the pack into place and pull the straps on the back clip until it's tight.

That should hold everything in place.

If your backpack is too heavy, this technique may not work for you.  This will only support a certain amount of weight...but I know that it worked for Runi Netra and his big "sandtrooper style" backpack as I helped him make the harness.

Hope that helps.

Thank you, it really did help a load! Will this "man bra" hold a sintra jetpack that's about 10 to 15 pounds? If yes, I have to start working on it! :)

Logged
Humans are like meatbags; you can throw them around, poke bayonets into them, but at the end, you strangely feel sorry for them.
Re: Harness Systems
« Reply #13 on: Feb 20, 2010, 01:05 AM »
Something that might be of use to someone (even though I am new to this hobby/ way of life)  is the military back pack.  I saw a few at the army surplus store today, but didn't plan on making a back pack, so didn't get one.   They come with a great way to support it, plenty of places to attach things, and I'm sure there not hard to mod to put just about anything on.

Logged

No'saj Huune


    *
  • *
  • 1290
  • Nomad in Killeen/Ft. Hood
Re: Harness Systems
« Reply #14 on: Feb 20, 2010, 03:11 AM »
I'm planning on using a Moll-E vest to attach my backpack when/if I finally make it.

Logged
Those who wander aren't always lost.
 


Don't like ads? Help support the Mercs by becoming a Supporter or Auxiliary Member today!
Official Members also get to use the forum ad-free - so kit up and join us!




Powered by EzPortal