Helmet
•   Dome, brow band and keyslots must be painted a redish-orange and purple with grey in the design as shown to match visual references.
•   Rear brow band must be painted orange.
•   Upper cheeks must be painted medium-dark grey.
•   Mandibles must be painted dark red/burgundy to match references.
•   The rear panels and lower cheeks must be painted khaki-grey.
•   The right ear must be painted light grey with an orange oval earcap to match references.
•   The left ear must be painted orange to match with a raised cylinder painted light grey.
•   The dome of the helmet must feature a stylized design in accordance with visual references.
•   Must feature a metallic range finder stalk with an accurate rangefinder topper with a grey lens greeblie on top of the rangefinder.
•   The top portion of the rangefinder must be painted dark red/burgundy and the bottom portion must be painted black.
•Must be weathered to match visual references.

Flight Suit
•   Must be a cotton or cotton blend stretch material two-piece garment with the top being black/ dark charcoal grey  with a medium grey pattern and the pants being light greyish brown with a greyish khaki pattern (see reference for color examples)
•   The top must be longsleeved and the pants must be able to tuck into the boots.
•   Top must have a raised collar with a shallow “V split” in the front

Chest Armor
•   Consists of segmented collar armor, right and left chest plates, and center diamond.
•   Must appear to be at least 3mm thick.
•   Chest plates, collar plates, and center diamond must be painted purple and fuchsia/maroon with additional colors to match designs and visual references.
•  Wearer’s left chest plate must feature an orange stylized design to match references
•   Wearer’s right chest plate must must feature two white diagonal stripes on either side of a red diagonal stripe painted to match references.
• Center diamond must be yellow/orangish gold to match references
• Segmented collar must be painted to match visual references and have accurate designs.
•   All plates must be painted and weathered to match references both in color and weathering pattern.
•   All armor must attach securely to the top with proper spacing and be appropriately sized to the wearer.

Shoulder Armor
•   Must appear to be at least 3mm thick. Must have six points and must curve around the upper arm and shoulder.
•   Right shoulder must be light grey with a faded checker pattern and feature the aurebesh “5” design with colors to match references.
•   Left shoulder must be yellow with convor/ convoree design painted to match references.
•   Must be painted and weathered to match references both in color and weathering pattern.

Boots
•   Must be made of black or dark charcoal leather or leather like material
•   Must have a black or dark charcoal high heel wedge sole
•   Must be high enough to stop just below the knee.
•   Must be weathered and paint splattered to match references. Pay close attention to the level of weathering on the wearer’s right boot, as it features heavier paint splatter than the left.

Holster Belt
•   Must be a medium brown leather or leather like material that secures via metal rectangular buckle in front.
•   Must feature 2 drop holsters with an angular design
•   The front holster straps must feature two rivets in a vertical line near the holster.
•   Must have two metallic loops on either side of the belt buckle with the holster connecting between the buckle and the loop.
•   Must feature two horizontal metallic loops where the holster connects to the belt in the back.
•   Must feature a droid caller-style communication device affixed horizontally to the left side

Gloves
•   Must be black or dark charcoal leather or leather-like material and a fingerless style.
•   Must overlap the flightsuit sleeve so that there is no skin between the garments, but must not extend past the wrist
•   Must be weathered and paint splattered to match references.

Elbow Armor
•   Must appear to be at least 3mm thick.
•   Must be painted orange with burgundy and silver weathering to match visual references.
•   Must be two plates that connect when the arm is straightened and separate when the arm is bent.
•   Must be painted and weathered to match references

Knee armor
•   Must appear to be at least 3mm thick.
•   Must be reddish-orange with yellow and silver paint damage to match visual references.
•   Right knee armor plate must feature two parallel vertical yellow stripes.
•   Must be painted and weathered to match references

Westar-35 pistols
•   Animated Clone Wars style pistols.
•   Must be a mismatched pair with one being painted blue, black, and grey, and the other painted grey, black, and orange.
•   Must be painted and weathered to match references in color and weathering pattern.

Wig
•   If no wig is worn the helmet must remain on at all times.

Wig BRL Level Approval/CRL Level Optional
•   Must be longer on the right side and cut shorter on the left  and styled to match references. Hair must be light purple with dark purple tips.

Paint Sprayer (Optional)
•   Must be constructed to match visual references.
•   Must feature a red rocker switch on the front of the device.
•   Must feature a silver paint canister in the back.
•   Must feature 5 round, silver push buttons on the left side.
•   Must be painted, weathered, and paint splattered to match visual references.