Menu

Sabine Wren S4 – Lothal Civilian Disguise

 

 

*** Vest ***

 

The Vest is constructed using 3 shades of orange. No shiny or heavy fabrics are allowed.  Fleece, flannel, lycra, spandex, etc. will not be accepted.

 – Lightest Orange 

  • A tall & wide (Stand-Away) collar.  Seams should match references.
  • The front lower torso comprises of three panels: a wide closure flap/panel that runs down the center of the vest and two panels on either side. Within the side panels are top-stitched details in the bottom inside corners; the right panel also having a silver button/snap.
  • The back lower torso comprises of two panels with the seam running down the center of the back.
  • The side seams under the arms sit further toward the back.

 – Medium Orange 

  • The upper yoke sections should come to the bottom of the shoulder blades on the back and approximately one inch above the bottom of the  arm hole on the front.
  • There are two silver/grey panels/stripes within the upper yoke sections (front and back).

 – Dark Orange 

  • The arm holes have a narrow shoulder extension. Should match references.
  • Band around the bottom.

 

 

*** Undershirt ***

 

The undershirt can be made as one full shirt or two separate shirts so long as it matches reference pictures.  No shiny or heavy fabrics are allowed.  Fleece, flannel, lycra, spandex, etc. will not be accepted.

 – Yellow Upper Shirt 

  • A mandarin collar with a notch in the center front. It is slightly shorter than the vest collar.
  • The sleeve seam starts at the center top of the shoulder & runs the length of the arm ending on the outside of the wrist.
  • Each sleeve has a diamond patch piece roughly situated on the elbow and darker in color.  The sleeve seam touches the front point of the diamond patch piece.
  • Sleeve length is between 3/4 and full length. The wrist should be visible between the sleeve and the glove.

 – Grey Under Shirt

  • Undershirt is mostly light grey (matching pants as closely as possible) with two darker grey panels running down the middle on the front only, both being about 1 ½” to 2″ wide.
  • No shiny or heavy fabrics are allowed.  Fleece, flannel, lycra, spandex, etc. will not be accepted.

 

 

*** Pants ***

 

  • Light grey pants with two welt pockets (or faux pockets) at the back.
  • Rectangular fly detail in the center front, either top-stitched or functional.
  • Visible seams running the length of the outside of the legs and down the middle of the seat/backside.
  • No shiny or heavy fabrics are allowed.  Fleece, flannel, lycra, spandex, etc. will not be accepted.

 

 

*** Belts ***

 

  • Two brown belts of about the same width, stacked one on top of the other. The lower belt has an elongated hexagonal buckle with a small circular decal on the right side. On the right side of the buckle  attached to the belt is a silver button/snap.
  • On both hips is a rectangular brown pouch with a small, silver rectangular tab.  Pouches should be taller than both stacked belts.
  • The left pouch having a communicator attached below the silver rectangular tab.
  • Belts should cover the seam from pants to shirt completely.

 

 

*** Gloves ***

 

  • Full-fingered black gloves with a thick rolled hem.

 

 

*** Boots ***

 

  • Black with no obvious zippers, or buckles. Silver/light grey wedge heel. Heels should be no larger than 2 in. / 5 cms.

 

 

*** Hair/Wig ***

 

  • The style is cut as an asymmetrical bob with the bangs hanging on the left side of the face. The hair is dark brown fading to dark purple tips.