Helmet

•   Dome must be painted red with black “tattoo” pattern painted to match visual references.
•   Mandibles and brow must be painted red.
•   Ears must be painted red.
•   Cheekbones must be painted charcoal black.
•   Cheeks must be painted white/light grey (heavily weathered).
•   Back panels must be painted black.
•   Helmet dome must feature 10 metal or metal-like polygonal spikes: 4 small spikes on the crown of the head, 4 large spikes between the small spikes and the brow, and 2 medium spikes on the side of the helmet between the large spikes and the brow.
•   Helmet must be the “Deathwatch” version of the Mandalorian helmet featuring the elongated mandibles and narrow T-visor.

Flight Suit

•   Must be a cotton or cotton blend one or two-piece garment colored tan and must fit snugly to the wearer.
•   Must have long sleeves with short sleeves on top of them.
•   Must not have any visible pockets or pouches.
•   Flight suit must be weathered to match visual references.

Neckseal

•   Must be a quilted tubular design made of the same fabric and color as the vest.

Flak Vest

•   Must be made of black leather, leather-like, or similarly sturdy material (duck cloth and canvas also recommended).
•   Must have two long shoulder tabs to mount the shoulder armor.
•   Must be short enough to stop before hitting the girth belt.

Boots

•   Must be charcoal grey/black canvas with black rubber sole and toe (Palladium Pampa High Canvas Boots recommended)

Chest Armor

•   Consists of collar armor, right and left chest plates, ab plate, and center diamond.
•   Must appear to be at least 3mm thick with rounded edges.
•   Must be Animated Death Watch style armor.
•   Must be painted red with stylized black “tattoo” patterns painted and weathered to match reference images.
•   All armor must attach securely to the vest with proper spacing.

Back Armor

•   Must appear to be at least 3mm thick with rounded edges.
•   Must be painted red at the top and fade to grey towards the bottom.
•   Must have curved cutout at the bottom.

Shoulder Armor

•   Must appear to be at least 3mm thick with rounded edges. Must have 4 points with an inward curve connecting the top and bottom point on each outside edge.
•   Must be painted red with black stylized “tattoo” pattern painted and weathered to match references.
•   Each shoulder must feature 3 polygonal metal or metal-like spikes mounted in the middle in a vertical line. Spikes get progressively smaller from the top to the bottom.

Cod Armor

•   Must appear to be at least 3mm thick with rounded edges.
•   Must be Animated Deathwatch style armor.
•   Must be tucked under the girth belt.
•   Must be painted red and must match visual references in color and weathering pattern.
•   Must curve under the inseam.

Thigh Armor

•   Must appear to be at least 3mm thick with rounded edges.
•   Must be Animated Deathwatch style armor.
•   Must be painted charcoal grey/black and weathered to match references.
•   Must be worn on the outside of the leg.
•   Must feature a solid box holster on each leg.

Knee Armor

•   Must appear to be at least 3mm thick.
•   Must be Animated Deathwatch style armor.
•   Must be painted charcoal grey/black and weathered to match references

Shin Armor

•   Must appear to be at least 3mm thick with rounded edges
•   Must be Animated Deathwatch style armor.
•   Must be painted red and weathered to match references.
•   Must fit closely around the shin.
•   Must be made of three angled sections: flat front and angled flat sides. The tops of the side segments must be angled downwards.

Boot Armor

•   Must appear to be at least 3mm thick with rounded edges.
•   Must be Animated Deathwatch style armor.
•   Must be painted charcoal grey/black and weathered to match references

Gauntlets

•   Must be Animated Deathwatch style armor.
•   Must be painted grey.
•   Must be worn with indented “closure” on the inside of the arm.
•   Must have two raised platforms on the top of the gauntlet with the platform closest to the wrist being taller than the one closer to the elbow.
•   Left gauntlet must feature a “comms device” constructed to match references.

Jetpack

•   Must be an “arena” style jetpack with snub nose center missile and nozzles mounted directly under the tanks on each side.
•   Must be grey with darker grey panels and patterns painted and weathered to match references.
•   Tank toppers must have a red and white stripe under the cone portion. Red stripe must be under the white stripe.
•   Nozzles must be charcoal grey/black.

Ammo Belt

•   Must have the following construction elements: Rectangular buckle in the center, 1 skinny rectangular section on each side of the buckle, 2 rectangular sections on each come next on each side, 2 large square sections come next on each side. On each hip there is a large square section with a smaller square cutout in the center. The back of the belt is a mirror of the front.
•   Must be charcoal grey/black solid material (plastic, rubber, cured leather, metal, etc.)

Gloves

•   Must be black leather/leather-like material.
•   Hand armor must be mounted to the back of each hand. These plates must be painted grey.

Girth Belt

•   Must be charcoal grey/black leather/leather-like material.
•   Must extend beyond the ammo belt on the top and bottom.

Pistols

•   Westar -35.
•   Must be painted silver with charcoal grey/black grips.