Helmet
•   Must be a Sabine helmet. No Night Owl helmets will be accepted
•   Dome, brow band and keyslots must be painted fuchsia/maroon, orange and grey in the design as shown to match visual references.
•   Upper cheeks must be painted medium-dark grey.
•   Mandibles must be painted dark red/burgundy and orange to match references.
•   The rear panels and lower cheeks must be painted light grey.
•   The right ear must be painted light grey with an orange oval earcap to match references.
•   The left ear must be painted orange to match with a raised cylinder painted light grey.
•   The dome of the helmet must feature a stylized design in accoradnance with visual references.
•   Must feature a metallic range finder stalk with an accurate rangefinder topper with a grey lens greeblie on top of the rangefinder.
•   Must be weathered to match visual references.

Flight Suit
•   Must be a cotton or cotton blend stretch material two-piece garment with the top being black/ dark charcoal grey  with a medium grey pattern and the pants being light greyish brown with a greyish khaki pattern (see reference for color examples)
•   The top must be longsleeved and the pants must be able to tuck into the boots.
•   Top must have a raised collar with a shallow “V split” in the front

Chest Armor
•   Consists of segmented collar armor, right and left chest plates, and center diamond.
•   Must appear to be at least 3mm thick.
•   Chest plates, collar plates, and center diamond must be painted orange and fuchsia/maroon with additional colors to mathc designs and visual references.
•   Wearer’s left chest plate must feature an orange stylized design to match references
•   Wearer’s right chest plate must must feature two diagonal stripes painted to match references.
•   Center diamond must be yellow/orangish gold to match references
•   All plates must be painted and weathered to match references both in color and weathering pattern.
•   All armor must attach securely to the top with proper spacing and be appropriately sized to the wearer.

Boots
•   Must be made of black or dark charcoal leather or leather like material
•   Must have a black or dark charcoal high heel wedge sole
•   Must be high enough to stop just below the knee.
•   Must feature flare canister holsters around tops of boots mounted in brown leather or leather-like loops.
•   Must be weathered and paint splattered to match references. Pay close attention to the level of weathering on the wearer’s right boot, as it features heavier paint splatter than the left.

Shoulder Armor
•   Must appear to be at least 3mm thick. Must have six points and must curve around the upper arm and shoulder.
•   Right shoulder must be light grey with a faded black and white check pattern and feature a maroon aurebesh “5” design with golden yellow outline inside an orange circle with a maroon boarder.
•   Left shoulder must be greyish purple with a creature design painted to match references.
•   Must be painted and weathered to match references both in color and weathering pattern.

Knee Armor
•   Must appear to be at least 3mm thick.
•   Knee armor must be painted fuchsia/maroon and orange.
•   Right knee must feature a vertical stripe in accurate colors.
•   Must be painted to match references in both color and weathering pattern.

Holster Belt
•   Must be a medium brown leather or leather like material that secures via metal rectangular buckle in front.
•   Must feature 2 drop holsters with an angular design
•   Must have two metallic loops on either side of the belt buckle with the holster connecting between the buckle and the loop.
•   Must feature two horizontal metallic loops where the holster connects to the belt in the back.

Ammo Belt
•   Must be a medium brown leather or leather like material that secures via metal rectangular buckle in front.
•    Must feature a left and a right rectangular hip pouches made in the same material as the belt.
•    Must feature 3 rectangular ammo pouches on the back of the belt.
•    Must feature a droid caller in a leather loop directly in front of the left hip pouch.

Gloves
•   Must be black or dark charcoal leather or leather-like material
•   Must extend to about 2-3 inches below the elbow.
•   Must be weathered and paint splattered to match references.
•   Must  have hand plates attached and painted to match references

Gauntlets
• Must be painted orange and fuchsia/maroon and styled to match visual references.
• Must be illuminated or have the appearance of being illuminated by painting or using a similar means to accurately portray the gauntlet electonics.

Elbow Armor
•   Must appear to be at least 3mm thick.
•   Must be painted fuchsia/maroon and orange to match visual references.
•   Must be two plates that connect when the arm is straightened and separate when the arm is bent.
•   Left elbow armor must feature a golden yellow stripe with a thinner golden yellow stripe directly to the left of it.
•   Must be painted and weathered to match references

Boot Armor
•   Must appear to be at least 3mm thick.
•   Must be painted orange and match visual references

Westar-35 pistols
•   Animated Clone Wars style pistols.
•   Must be a mismatched pair with one being painted blue, black, and grey, and the other painted grey, black, and orange.
•   Must be painted and weathered to match references in color and weathering pattern.

Wig
•   If no wig is worn the helmet must remain on at all times.

Wig BRL Level Approval/CRL Level Optional
•   Dark blue/purple with aqua tips styled to match references.

Paint Sprayer (Optional)
•   Must be constructed to match visual references.
•   Must feature a red rocker switch on the front of the device.
•   Must feature a silver paint canister in the back.
•   Must feature 5 round, silver push buttons on the left side.
•   Must be painted, weathered, and paint splattered to match visual references.