Helmet
•   The helmet is painted chrome.
•   The helmet has a raised comb running along the centre of the dome, which is approx. 4cm/1,5 inches wide. This comb ends just above the keyslot box in the rear. The centre part of the comb is flat, with sloping sides.
•   The helmet has a double brow above the visor. This brow does not extend past the earcaps.
•   Both earcaps are mirrored copies of each other and consist out of two sections. Both sections are painted chrome, with a dark colored band running across the side of the top part. The center raised part of the earcaps (both top and bottom part) are a lighter shade of chrome.
•   The back of the helmet has a rectangular box with 6 louvered keyslots. The louvres are a lighter shade of chrome.
•   The paint chipping and weathering on the helmet must be painted to match visual references as closely as possible both in color and in weathering pattern.
•   Helmet must match visual references.

Flight Suit
•   Must be a cotton or cotton blend one or two-piece garment colored off-gray and must fit snugly to the wearer. If a two-piece suit is used it must appear as if one-piece.
•   Must have long sleeves with short sleeves on top of them, both made from the same material. Each short sleeve has a plain seam about an inch thick running on the bottom edge and along the front of the sleeve. Both the short and long sleeves have a white pattern stitched on them.
•   The flightsuit has no visible pockets.
•   The flightsuit has visible, white stitching.
•   The knees and inside legs of the flightsuit have reinforcing patches.
•   The flightsuit has light weathering across its entirety.
•   Flightsuit must match visual references.

Neck seal
•   Must be made of the same material and color as the flightsuit.
•   The neckseal has visible, white stitching.
•   The neckseal has light weathering.
•   Neckseal must match visual references.

Flak Vest
•   Light tan colored flak vest.
•   The flak vest has black leather or faux leather straps on top which run the entire length of the shoulders.
•   The flak vest has light weathering across its entirety.
•   Flak vest must match visual references.

Cummerbund
•   Light brown colored cummerbund that covers the area between the flak vest and belt.
•   The front of the cummerbund has a trapezoid flap which extends past the belt.
•   Must have piping on both sides.
•   The cummerbund has light weathering across its entirety.
•   Cummerbund must match visual references.

Boots
•   Chelsea style boots.
•   Most accurate shoes are Sketchers brand “Blaine Orsen” boots
•   Light brown roughout leather or leather like material
•   The boots have a stitched on grey leather patch on the inside and brown flap on the front.
•   The boots have moderate weathering with several discoloured patches.
•   Boots must match visual references.

Chest Armor
•   Consists of a solid chest plate with a recessed diamond. The diamond has a recessed middle section.
•   The ab plate connects to the chest plate.
•   Must appear to be at least 3mm thick with rounded edges.
•   The main color of the plates is reddish brown.
•   The diamond is painted silver
•   All plates must be painted and weathered to match references both in color and weathering pattern.
•   Can only feature damage inflicted by mudhorn in episode 3 if the beskar pauldron, damaged thighs and damaged gauntlets are worn.
•   All armor must attach securely to the vest.
•   Chest armor must match visual references.

Back Armor
•   Must appear to be at least 3mm thick with rounded edges.
•   The color of the backplate is reddish brown.
•   Must be painted and weathered to match references both in color and weathering pattern.
•   In addition to his backplate, the Mandalorian wears a black, woollen cape which connects to the chest plate and covers the area between the shoulder plates and neck.
•  The cape may have a hole in it through which a loop runs that holds the pulse blaster in place.
•   Back armor must match visual references.

Kidney armor
•   Trapezoid shaped plate which attaches to the bottom of the belt.
•   Must appear to be at least 3mm thick with rounded edges.
•   The color of the plate is reddish brown.
•   Must be painted and weathered to match references both in color and weathering pattern.
•   Kidney armor must match visual references.

Shoulder Armor
•   Must appear to be at least 3mm thick with rounded edges.
•   The left shoulder plate is painted reddish brown with a thick rim running along the edge.
•   The right shoulder plate is a either shoretrooper style plate which is painted sand yellow with a blue upper section, or a beskar shoulder plate with a raised middle section and edges.
•   Must be painted and weathered to match references both in color and weathering pattern.
•   shoulder armor must match visual references.

Left knee Armor
•   Must appear to be at least 3mm thick with rounded edges.
•   Greyish blue modern style kneepad
•   Must feature 2 identical silver cylindrical dart launchers on the outside, mounted to a rectangular housing.
•   Must be painted and weathered to match references both in color and weathering pattern.
•   The kneepad has black elastic strapping in the back.
•   Knee armor must match visual references.

Left shin Armor
•   Brown leather or leather like armor which runs the entire circumference of the shin.
•   The top part has a double band with a small leather pouch on the outside.
•   The middle part of the shin armor has a rounded, orange armored plate with a flat front.
•   The bottom section of the shin is ribbed.
•   Must be painted and weathered to match references both in color and weathering pattern.
•   Shin armor must match visual references.

Right shin Armor
•   Shoretrooper style shin armor without plastic reinforcing straps
•   The color of the shin is dark brown with the top V-shaped part painted reddish brown.
•   The shin has 2 leather straps where the original reinforcing straps where located.
•   The upper leather strap has 6 loops with blaster charges.
•   The shin has a blue and metal distressed knife in it.
•   Must be painted and weathered to match references both in color and weathering pattern.
•   Shin armor must match visual references.

Left thigh plate
•   Must appear to be at least 3mm thick with a thick rim running along the edge.
•   The color of the thigh is sand yellow.
•   Must feature a canted ridge about 1/4 away from the inner edge.
•   Must be painted and weathered to match references both in color and weathering pattern.
•   Can only feature damage inflicted by mudhorn in episode 3 if the beskar pauldron, damaged chest plate and damaged gauntlets are worn.
•   Thigh armor must match visual references.

Right thigh plate
•   Must appear to be at least 3mm thick with a thick rim running along the edge.
•   The color of the thigh is reddish brown.
•   Must feature a raised bar in the middle
•   Must be painted and weathered to match references both in color and weathering pattern.
•   Can only feature damage inflicted by mudhorn in episode 3 if the beskar pauldron, damaged chest plate and damaged gauntlets are worn.
•   Thigh armor must match visual references.

Hip armor
•   Two armored plates are located on the side, below the belt.
•   Must appear to be at least 3mm thick with rounded edges.
•   The color of the plates is dark blue.
•   Must feature a canted ridge running from top to bottom.
•   Must be painted and weathered to match references both in color and weathering pattern.
•   Hip armor must match visual references.

Left Gauntlet
•   The color of the gauntlet  is reddish brown.
•   Clamshell style gauntlets without any visible closure method.
•   Must feature a silver colored keypad on the wrist with 4 rows of 5 round buttons, of which the 3 center buttons of each row are slightly larger.
•   The front of the raised section has a silver detail about 3/4 inch wide.
•   Must be painted and weathered to match references both in color and weathering pattern.
•   Can only feature damage inflicted by Blurgs in episode 1 if the beskar pauldron is worn.
•   Gauntlet must match visual references.

Right Gauntlet
•   The color of the gauntlet  is reddish brown.
•   Clamshell style gauntlets without any visible closure method.
•   The raised section of the gauntlet has a square hole on the front with a heads up display, and a rectangular housing on the back holding 4 silver rockets.
•   The right side of the gauntlet has a cylindrical silver flamethrower.
•   Must be painted and weathered to match references both in color and weathering pattern.
•   Can only feature damage inflicted by Blurgs in episode 1 if the beskar pauldron is worn.
•   Gauntlet must match visual references.

Ammo Belt
•   The belt is made from brown leather or leather-like material.
•   The left side of the belt has 1 square pouch and a 3 explosive charges in a metal holder.
•   Each charge has a red, rounded plastic eye in the middle.
•   The right side of the belt has 1 cylindrical pouch and 2 loops with blaster charges
•   The belt is closed with a flat, silver buckle which has 2 screws on the front.
•   The rear of the belt has an additional 4 loops for blaster charges, 2 on each side.
•   The rear of the belt has a square metallic plate to which the bandoleer connects. This plate also has a leather belt loop for the pulse blaster.
•   Must feature a brown leather holster for the sidearm.
•   Belt must match visual references.

Gloves
•   The gloves are leather or leather-like material
•   Black finger-less gloves with golden tan fingers.
•   The gloves have an off white armor plate with a blue triangle in the center.
•   Gloves must match visual references.

Bandoleer
•   The belt has an attached bandoleer, which slings across the left shoulder.
•   The bandoleer has 6 loops in the middle which contain blaster charges. The second loop from the top is empty.
•   The bandoleer has a silver buckle on top, which connects to the sling of the pulse blaster
•   Bandoleer must match visual references.

Weapon
•   Amban phase-pulse blaster
•   The blaster is gun metal with silver accents and a wooden stock
•   The forked barrel and body of the rifle have heat discolorations
•   Must be painted and weathered to match references in color and weathering pattern.
•   Weapon must match visual references.

Sidearm
•   Based on a Bergmann 1896 pistol
•   Features a silver-black conical muzzle
•   Sidearm must match visual references.