Helmet
•   The helmet is painted chrome.
•   The helmet has a raised comb running along the centre of the dome, which is approx. 4cm/1,5 inches wide. This comb ends just above the keyslot box in the rear. The centre part of the comb is flat, with sloping sides.
•   The helmet has a double brow above the visor. This brow does not extend past the earcaps.
•   Both earcaps are mirrored copies of each other and consist out of two sections. Both sections are painted chrome, with a dark colored band running across the side of the top part. The center raised part of the earcaps (both top and bottom part) are a lighter shade of chrome.
•   The back of the helmet has a rectangular box with 6 louvered keyslots. The louvres are a lighter shade of chrome.
•   The paint chipping and weathering on the helmet must be painted to match visual references as closely as possible both in color and in weathering pattern.
•   Helmet must match visual references.

Flight Suit
•   Must be a cotton or cotton blend one or two-piece garment colored medium gray with a purplish hue, and must fit snugly to the wearer. If a two-piece suit is used it must appear as if one-piece.
•   Must have long sleeves with short sleeves on top of them, both made from the same material. Each short sleeve has a plain seam about an inch thick running on the bottom edge and along the front of the sleeve. Both the short and long sleeves have a white pattern stitched on them.
•   The flightsuit has no visible pockets.
•   The flightsuit has visible, white stitching.
•   The knees and inside legs of the flightsuit have reinforcing patches.
•   The flightsuit has light weathering across its entirety.
•   Flightsuit must match visual references.

Neck seal
•   Must be made of the same material and color as the flightsuit.
•   The neckseal has visible, white stitching.
•   The neckseal has light weathering.
•   Neckseal must match visual references.

Flak Vest
•   flak vest made of the same material and color as the flightsuit.
•   The flak vest has black leather or faux leather straps on top which run the entire length of the shoulders.
•   The flak vest has light weathering across its entirety.
•   Flak vest must match visual references.

Cummerbund
•  Light brown colored cummerbund made from cotton or cotton blend material that covers the area between the flak vest and belt.
•   The cummerbund has piping on both sides
•   Must feature a leather or leather like apron on the front with raised details
•   The apron has a rounded flap which extends past the belt.
•   The cummerbund has light weathering across its entirety.
•   Cummerbund must match visual references.

Boots
•   Chelsea style boots.
•   Most accurate shoes are Sketchers brand “Blaine Orsen” boots
•   Light brown roughout leather or leather like material
•   The boots have a stitched on grey leather patch on the inside and brown flap on the front.
•   The boots have moderate weathering with several discoloured patches.
•   Boots must match visual references.

Chest Armor
•   Consists of a solid chest plate with an integrated diamond.
•   The sides of the diamond slope towards the center part.
•   The ab plate must touch the chest plate.
•   The fangs of the chest plate overlap the ab plate
•   The plates are painted chrome.
•   All plates must be painted and weathered to match references both in color and weathering pattern.
•   May feature optional carbon scoring/weathering inflicted by sniper fire in episode 5 or E-web blaster explosion in episode 8.
•   All armor must attach securely to the vest.
•   Chest armor must match visual references.

Back Armor
•  The backplate is painted chrome
•  Must be painted and weathered to match references both in color and weathering pattern.
•  In addition to his backplate, the Mandalorian wears a black, woolen cape which connects to the chest plate and covers the area between the shoulder plates and neck.
•  The cape may have a hole in it through which a loop runs that holds the pulse blaster in place.
•  Back armor must match visual references.

Kidney Armor
•   Trapezoid shaped plate which attaches to the bottom of the belt.
•   The kidney plate is painted chrome
•   Must be painted and weathered to match references both in color and weathering pattern.
•   Kidney armor must match visual references.

Shoulder Armor
•   both shoulder plates are mirrored copies of each other
•   Shoulder plates must have a raised middle section and edges.
•   Both shoulder plates are painted chrome
•   May only feature the mudhorn signet if the weathering inflicted in episode 8 is present on the costume.
•   Must be painted and weathered to match references both in color and weathering pattern.
•   shoulder armor must match visual references.

Left shin Armor
•   Brown leather or leather like armor which runs the entire circumference of the shin.
•   The top part has a double band with a small leather pouch on the outside.
•   The middle part of the shin armor has a rounded, orange armored plate with a flat front.
•   The bottom section of the shin is ribbed.
•   Must be painted and weathered to match references both in color and weathering pattern.
•   Shin armor must match visual references.

Right shin Armor
•   Shoretrooper style shin armor without plastic reinforcing straps
•   The color of the shin is dark brown with the top V-shaped part painted reddish brown.
•   The shin has 2 leather straps where the original reinforcing straps where located.
•   The upper leather strap has 6 loops with blaster charges.
•   The shin has a blue and metal distressed knife in it.
•   Must be painted and weathered to match references both in color and weathering pattern.
•   Shin armor must match visual references.

Right thigh plate
•   Must appear to be at least 3mm thick with a thick rim running along the edge.
•   The thigh is painted chrome with black and red parts.
•   Must feature a raised middle section:
•   Must be painted and weathered to match references both in color and weathering pattern.
•   Thigh armor must match visual references.

Left thigh plate
•   Must appear to be at least 3mm thick with a thick rim running along the edge.
•   The thigh is painted chrome.
•   Must feature a raised middle section
•   Must feature visible damage and welding marks
•   Must be painted and weathered to match references both in color and weathering pattern.
•   Thigh armor must match visual references.

Hip Armor
•   Two armored plates are located on the side, below the belt.
•   Must appear to be at least 3mm thick with rounded edges.
•  The plates are painted dark blue.
•   Must feature a canted ridge running from top to bottom.
•   Must be painted and weathered to match references both in color and weathering pattern.
•   Hip armor must match visual references.

Left Gauntlet
•   The gauntlet is painted chrome.
•   Clamshell style gauntlets without any visible closure method.
•   Must feature a silver colored keypad on the wrist with 4 rows of 5 round buttons, of which the 3 center buttons of each row are slightly larger.
•   Must feature a half recessed “whistling birds” wrist rocket on the raised section;
•   Must be painted and weathered to match references both in color and weathering pattern.
•   Gauntlet must match visual references.

Right Gauntlet
•   The gauntlet is painted chrome.
•   Clamshell style gauntlets without any visible closure method.
•   The raised section of the gauntlet features a heads up display in the rear.
•   The top right side of the gauntlet has a cylindrical silver flamethrower inside a square housing.
•   Must be painted and weathered to match references both in color and weathering pattern.
•   Gauntlet must match visual references.

Ammo Belt
•   The belt is made from brown leather or leather-like material.
•   The left side of the belt has 1 square pouch and 3 explosive charges in a metal holder.
•   Each charge has a red, rounded plastic eye in the middle.
•   The right side of the belt has 1 cylindrical pouch and 2 loops with blaster charges
•   The belt is closed with a flat, silver buckle which has 2 screws on the front.
•   The rear of the belt has an additional 4 loops for blaster charges, 2 on each side.
•   The rear of the belt has a square metallic plate to which the bandoleer connects. This plate also has a leather belt loop for the pulse blaster.
•   Must feature a brown leather holster for the sidearm.
•   Belt must match visual references.

Gloves
•   The gloves are leather or leather-like material
•   Black fingerless gloves with golden tan fingers.
•   The gloves have an off white armor plate with a blue triangle in the center.
•   Gloves must match visual references.

Bandoleer
•   The belt has an attached bandoleer, which slings across the left shoulder.
•   The bandoleer has 6 loops in the middle which contain 4 blaster charges. The bottom loop and second loop from the top is empty.
•   The bandoleer has a silver buckle on top, which connects to the sling of the pulse blaster
•   Bandoleer must match visual references.

Jetpack
•  “Arena” style jetpack
•  The jetpack is painted chrome
•  Must feature 2 ribbed squares on the center body.
•  Jetpack may only be worn if the damage inflicted in episode 8 is present.

Weapon
•   Amban phase-pulse blaster
•   The blaster is gun metal with silver accents and a wooden stock
•   The forked barrel and body of the rifle have heat discolorations
•   Must be painted and weathered to match references in color and weathering pattern.
•   Weapon must match visual references.
•   This weapon is optional for this costume, as it is only used in episode 3 & 4, and no longer appears in the rest of the season.

Sidearm
•   Based on a Bergmann 1896 pistol
•   Features a silver-black conical muzzle
•   Sidearm must match visual references.